HD64F3664FPV Renesas Electronics America, HD64F3664FPV Datasheet - Page 119

• Manufacturer Part Number: HD64F3664FPV
• Description: IC H8/3664 MCU FLASH 32K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3664FPV

• Core Size: 16-Bit
• Program Memory Size: 32KB (32K x 8)
• Oscillator Type: External
• Core Processor: H8/300H
• Speed: 16MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 29
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• No. Of I/o's: 29
• Ram Memory Size: 2KB
• Cpu Speed: 16MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage: RoHS Compliant
• Controller Family/series: H8/300H
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.2.1
FLMCR1 is a register that makes the flash memory change to program mode, program-verify
mode, erase mode, or erase-verify mode. For details on register setting, refer to section 7.4, Flash
Memory Programming/Erasing.
Bit
7
6
5
4
3
2
1
0
Bit Name
—
SWE
ESU
PSU
EV
PV
E
P
Flash Memory Control Register 1 (FLMCR1)
Initial Value
0
0
0
0
0
0
0
0
R/W
—
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Reserved
This bit is always read as 0.
Software Write Enable
When this bit is set to 1, flash memory
programming/erasing is enabled. When this bit is
cleared to 0, other FLMCR1 register bits and all
EBR1 bits cannot be set.
Erase Setup
When this bit is set to 1, the flash memory changes to
the erase setup state. When it is cleared to 0, the
erase setup state is cancelled. Set this bit to 1 before
setting the E bit to 1 in FLMCR1.
Program Setup
When this bit is set to 1, the flash memory changes to
the program setup state. When it is cleared to 0, the
program setup state is cancelled. Set this bit to 1
before setting the P bit in FLMCR1.
Erase-Verify
When this bit is set to 1, the flash memory changes to
erase-verify mode. When it is cleared to 0, erase-
verify mode is cancelled.
Program-Verify
When this bit is set to 1, the flash memory changes to
program-verify mode. When it is cleared to 0,
program-verify mode is cancelled.
Erase
When this bit is set to 1, and while the SWE=1 and
ESU=1 bits are 1, the flash memory changes to erase
mode. When it is cleared to 0, erase mode is
cancelled.
Program
When this bit is set to 1, and while the SWE=1 and
PSU=1 bits are 1, the flash memory changes to
program mode. When it is cleared to 0, program
mode is cancelled.
Rev. 5.00, 03/04, page 91 of 388