LPC3130FET180,551 NXP Semiconductors, LPC3130FET180,551 Datasheet - Page 29

• Manufacturer Part Number: LPC3130FET180,551
• Description: IC ARM9 MCU 180MHZ 180-TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3130FET180,551

• Package / Case: 180-TFBGA
• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, PWM, WDT
• Program Memory Type: ROMless
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJ-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 96 KB
• Interface Type: I2C/I2S/UART/USB
• Maximum Clock Frequency: 180 MHz
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 10-bit
• Cpu Family: LPC3000
• Device Core: ARM926EJ-S
• Device Core Size: 16/32Bit
• Frequency (max): 180MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 96KB
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.2/1.8/2.8/3.3/5V
• Operating Supply Voltage (max): 1.3/3.6V
• Operating Supply Voltage (min): 1/1.1/1.65/2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 180
• Package Type: TFBGA
• Package: 180TFBGA
• Family Name: LPC3000
• Maximum Speed: 180 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-4850 - KIT EVAL FOR LPC313X568-4062 - DEBUGGER J-LINK JTAG568-4061 - DEBUGGER U-LINK2 JTAG FOR NXP
• Number Of I /o: -
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4696; 935288013551; LPC3130FET180-S

NXP Semiconductors
LPC3130_3131
Preliminary data sheet
6.23 Pulse Code Modulation (PCM) interface
6.24 LCD interface
The PCM interface supports the PCM and IOM interfaces.
The IOM (ISDN Oriented Modular) interface is primarily used to interconnect
telecommunications ICs providing ISDN compatibility. It delivers a symmetrical full-duplex
communication link containing user data, control/programming lines, and status channels.
PCM (Pulse Code Modulation) is a very common method used for transmitting analog
data in digital format. Most common applications of PCM are digital audio as in Audio CD
and computers, digital telephony and videos.
This module has the following features:
The dedicated LCD interface contains logic to interface to a 6800 (Motorola) or 8080
(Intel) compatible LCD controllers which support 4/8/16 bit modes. This module also
supports a serial interface mode. The speed of the interface can be adjusted in software to
match the speed of the connected LCD display.
This module has the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SIR-IrDA encoder/decoder (from 2400 to 115 kBd).
Supports maskable interrupts.
Supports DMA transfers.
Four-wire serial interface.
Can function in both Master and Slave modes.
Supports:
– PCM: Single clocking physical format.
– Multi-Protocol (MP) PCM: Configurable directional per slot.
– IOM-2: Extended ISDN-Oriented modular. Double clocking physical format.
Twelve eight bit slots in a frame with enabling control per slot.
Internal frame clock generation in master mode.
Receive and transmit DMA handshaking using a request/clear protocol.
Interrupt generation per frame.
4/8/16 bit parallel interface mode: 6800-series, 8080-series.
Serial interface mode.
Supports multiple frequencies for the 6800/8080 bus to support high- and low-speed
controllers.
Supports polling the busy flag from LCD controller to off-load the CPU from polling.
Contains an 16 byte FIFO for sending control and data information to the LCD
controller.
Supports maskable interrupts.
Supports DMA transfers.
All information provided in this document is subject to legal disclaimers.
Rev. 1.04 — 27 May 2010
Low-cost, low-power ARM926EJ-S microcontrollers
LPC3130/3131
© NXP B.V. 2010. All rights reserved.
29 of 72