AT91SAM7S16-MU Atmel, AT91SAM7S16-MU Datasheet - Page 110

• Manufacturer Part Number: AT91SAM7S16-MU
• Description: MCU ARM 16K HI SPD FLASH 48-QFN
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S16-MU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-QFN Exposed Pad
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

19.2.4.1
110
AT91SAM7S Series Preliminary
Flash Programming
Figure 19-5. Command State Chart
In order to guarantee valid operations on the Flash memory, the field Flash Microsecond Cycle
Number (FMCN) in the Flash Mode Register MC_FMR must be correctly programmed (see
Flash Mode Register” on page
Several commands can be used to program the Flash.
The Flash technology requires that an erase must be done before programming. The entire
memory plane can be erased at the same time, or a page can be automatically erased by clear-
ing the NEBP bit in the MC_FMR register before writing the command in the MC_FCR register.
By setting the NEBP bit in the MC_FMR register, a page can be programmed in several steps if
it has been erased before (see
Write FCMD and PAGENB in MC_FCR
Check if PROGE flag set
Read Status: MC_FSR
Check if FRDY flag set
Read Status: MC_FSR
Check if FRDY flag set
Check if LOCKE flag set
Command Successful
Yes
Yes
No
No
116).
Figure
19-6).
No
No
Yes
Yes
Locking region violation
Bad keyword violation and/or Invalid command
6175K–ATARM–30-Aug-10
“MC