PIC18C801-I/PT Microchip Technology, PIC18C801-I/PT Datasheet - Page 171

• Manufacturer Part Number: PIC18C801-I/PT
• Description: IC PIC MCU ROMLESS 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Cr

Specifications of PIC18C801-I/PT

• Core Size: 8-Bit
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Number Of I /o: 37
• Program Memory Type: ROMless
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 67
• Ram Memory Size: 1.5KB
• Cpu Speed: 6.25MIPS
• No. Of Timers: 4
• Program Memory Size: EXT
• Processor Series: PIC18C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1.5 KB
• Interface Type: 3-Wire, I2C, SPI, USART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 47
• Number Of Timers: 1 x 16 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DV164005, ICE4000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC174011 - MODULE SKT PROMATEII 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC18C801I/PT

15.4.12
Clock arbitration occurs when the master, during any
receive, transmit or Repeated START/STOP condition,
de-asserts the SCL pin (SCL allowed to float high).
When the SCL pin is allowed to float high, the baud rate
generator (BRG) is suspended from counting until the
SCL pin is actually sampled high. When the SCL pin is
sampled high, the baud rate generator is reloaded with
the contents of SSPADD<6:0> and begins counting.
This ensures that the SCL high time will always be at
least one BRG rollover count, in the event that the clock
is held low by an external device (Figure 15-19).
FIGURE 15-19:
BRG overflow,
Release SCL,
If SCL = 1, load BRG with
SSPADD<6:0> and start count
to measure high time interval
2001 Microchip Technology Inc.
SCL
SDA
CLOCK ARBITRATION
CLOCK ARBITRATION TIMING IN MASTER TRANSMIT MODE
T
BRG
BRG overflow occurs,
Release SCL, Slave device holds SCL low.
Advance Information
T
BRG
SCL line sampled once every machine cycle (T
Hold off BRG until SCL is sampled high.
15.4.13
While in SLEEP mode, the I
addresses or data, and when an address match or
complete byte transfer occurs, wake the processor
from SLEEP (if the MSSP interrupt is enabled).
15.4.14
A RESET disables the MSSP module and terminates
the current transfer.
SLEEP OPERATION
EFFECT OF A RESET
T
PIC18C601/801
BRG
SCL = 1 BRG starts counting
clock high interval.
2
C module can receive
OSC
DS39541A-page 171
² 4).