PIC16F1937-I/ML Microchip Technology, PIC16F1937-I/ML Datasheet - Page 327

• Manufacturer Part Number: PIC16F1937-I/ML
• Description: IC PIC MCU FLASH 512KX14 44-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1937-I/ML

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Controller Family/series: PIC16F
• No. Of I/o's: 36
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 512Byte
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

26.0
The Liquid Crystal Display (LCD) driver module
generates the timing control to drive a static or
multiplexed LCD panel. In the PIC16F193X/LF193X
device, the module drives the panels of up to four
commons and up to 24 segments. The LCD module
also provides control of the LCD pixel data.
The LCD driver module supports:
• Direct driving of LCD panel
• Three LCD clock sources with selectable prescaler
• Up to four common pins:
FIGURE 26-1:
 2009 Microchip Technology Inc.
- Static (1 common)
- 1/2 multiplex (2 commons)
- 1/3 multiplex (3 commons)
- 1/4 multiplex (4 commons)
Note 1:
LIQUID CRYSTAL DISPLAY
(LCD) DRIVER MODULE
2:
3:
These are not directly connected to the I/O pads, but may be tri-stated, depending on the configuration of
the LCD module.
SEG<23:0> on PIC16F1934/1937/1939, SEG<15:0> on PIC16F1933/1936/1938/
PIC16LF1933/1936/1938.
COM3 and SEG15 share the same physical pin on the PIC16F1933/1936/1938/PIC16LF1933/1936/1938,
therefore SEG15 is not available when using 1/4 multiplex displays.
Data Bus
LCD DRIVER MODULE BLOCK DIAGRAM
F
T1OSC
LFINTOSC
OSC
/256
Timing Control
Clock Source
LCDDATAx
Select and
Registers
Prescaler
LCDCON
LCDSEn
LCDPS
Preliminary
COM<3:0>
MUX
• Segment pins up to:
• Static, 1/2 or 1/3 LCD Bias
(3)
PIC16F193X/LF193X
- 16 (PIC16F1933/1936/1938/
- 24 (PIC16F1934/1937/1939/
Note:
PIC16LF1933/1936/1938)
PIC16LF1934/1937/1939)
SEG<23:0>
To I/O Pads
displays.
COM3 and SEG15 share the same physical
pin on the PIC16F1933/1936/1938/
PIC16LF1933/1936/1938, therefore SEG15
is not available when using 1/4 multiplex
(1, 3)
(1)
To I/O Pads
(1)
DS41364D-page 327