MPC8349E-MITX-GP Freescale Semiconductor, MPC8349E-MITX-GP Datasheet - Page 19

• Manufacturer Part Number: MPC8349E-MITX-GP
• Description: KIT REFERENCE PLATFORM MPC8349E
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II™ PROr
• Type: MPUr

Specifications of MPC8349E-MITX-GP

• Contents: Module and Misc Hardware
• For Use With/related Products: MPC8349E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 9
Freescale Semiconductor
Position
Reference
G
H
F
BT1
P11
P14
P15
P17
P18
J10
J14
P1
U1
J4
J5
J9
lists the connectors, jumpers, switches, and LEDs on the MPC8349E-mITX-GP board.
PCI_M66EN
I2C-WP
Name
F_WP
Battery holder for RTC
Background Debug Mode (BDM). Header for Flash programming and debug of on-board MC9S08QG8
Microcontroller.
12V fan connector
5 V fan connector
Case connector
32-bit 3.3 V PCI connector
USB MiniAB connector
RJ-45 connectors Enet0 (top). Typically Enet0 is the WAN connector. See
COM1 serial port terminal connector (RS-232)
14 pins COP/JTAG connector
ATX Power connector
DIMM184 DDR1 connector
CPU power control jumper. Selects ATX power supply on/off to be controlled by push button S5 (jumper 2–3
as default) or MCU firmware (jumper 1–2).
OFF = Jumper Is Off
MPC8349E-mITX-GP Reference Design Platform User’s Guide, Rev. 0
ON = Jumper Is On
Table 9. Lists of Connectors, Jumpers, Switches, and LEDs
OFF (1)
Default
ON (0)
ON (0)
Table 8. Description of Jumper J22 Positions
Preliminary—Subject to Change Without Notice
OFF (1):
M66EN signal is determined by the card plugged into the PCI slot (PCI 32-bit
slot and MiniPCI slot).
ON (0): Default
M66EN signal is hardwired to 0, which is hard coded to 33 MHz PCI
operation.
OFF (1):
I
ON (0): Default
I
OFF (1): Default
Flash (U7) are not write protected.
ON (0):
Flash (U7) are write protected.
2
2
C EEPROM (U64) is write protected.
C EEPROM (U64) is not write protected.
Connectors
Jumpers
Description
Description
Figure
7.
MPC8349E-mITX-GP Board
19