DC9S08QE32 Freescale Semiconductor, DC9S08QE32 Datasheet - Page 27

• Manufacturer Part Number: DC9S08QE32
• Description: DAUGHTER CARD FOR DEMO9S
• Manufacturer: Freescale Semiconductor

Specifications of DC9S08QE32

• Accessory Type: Daughter Card
• Processor To Be Evaluated: MC9S08QE32
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08QE
• Rohs Compliant: Yes
• For Use With/related Products: DEMO9S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.3
7.3.1
7.4
DEMO9S08QE32 User Manual
Note:
LED Display Port
Input and Reset Switches
J9 - LED Display Enable Port LED_ENABLE
Figure 7-6: SCI Transceiver Enable/Disable Selection COM_EN (J8)
The DEMOQE Base Board has 8 LEDs connected to signals PTC0, PTC1,
PTC2, PTC3, PTC4, PTC5, PTE6, and PTE7. They can be enabled or
disabled by installing or removing the corresponding jumper, J9, in the
LED_ENABLE header.
PTE6 and PTE7 have no effect on QE32 devices.
The DEMO9S08QE32 has an option to connect two signals, PTC0 and PTC1,
to the Embedded Multilink for signal processing. The two signals are
connected or disconnected to IN0 or IN1 correspondingly, via jumpers P&E
INPUT_EN (J11).
The DEMO9S08QE32 has 4 switches that are connected to signals PTA2,
PTA3, PTD2, and PTD3 respectively, and are enabled or disabled by the 4
corresponding jumpers KEY_ENABLE (J12).
The DEMO9S08QE32 has one Reset switch and one Reset LED associated
with it. These are enabled or disabled by the two corresponding jumpers
RESET_EN (J18).
Figure 7-7: LED Display Enable Header LED_ENABLE (J9)
Disables the SCI Transceiver. This is the default setting.
Enables all LED outputs. This is the default setting.
23