DC9S08QE32 Freescale Semiconductor, DC9S08QE32 Datasheet - Page 16

• Manufacturer Part Number: DC9S08QE32
• Description: DAUGHTER CARD FOR DEMO9S
• Manufacturer: Freescale Semiconductor

Specifications of DC9S08QE32

• Accessory Type: Daughter Card
• Processor To Be Evaluated: MC9S08QE32
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08QE
• Rohs Compliant: Yes
• For Use With/related Products: DEMO9S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.2
12
DEMOQE Terminal Application
This PC-based application is used to display the logic analyzer data on the
PC. The logic analyzer data is displayed in real-time and each waveform may
be paused, zoomed, and printed.
If the microcontroller-based Quick Start Application is programmed into the
MCU, the IN0 channel will show the PWM output on pin PTC0 whose duty
cycle is controlled by the potentiometer (W1). The IN1 channel shows the
PWM output on channel PTC1 which drivers the buzzer.
This PC-based application is included on the CD-ROM that accompanys the
DEMOQE, and may also be found at:
http://www.pemicro.com/fixedlinks/demoQEtoolkit.html.
This PC-based application acts as a standard serial port terminal application
on the PC. It works with standard serial ports as well as the virtual serial port
on the DEMOQE board. The application includes settings to adjust the COM
port number, baud rate, parity, and number of data bits. There is a button to
take a file on the PC and transmit it out of the serial port. There are also
delays which are automatically inserted in the transmission output to prevent
overruns. It is recommended that these defaults not be changed.
Figure 5-1: Logic Analyzer Application
DEMO9S08QE32 User Manual