20-101-0542 Rabbit Semiconductor, 20-101-0542 Datasheet - Page 10

• Manufacturer Part Number: 20-101-0542
• Description: CABLE 1.27MM FOR RCM3200
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0542

• Accessory Type: Programming Cable
• Product: Microcontroller Accessories
• For Use With/related Products: Rabbit 3000-based products, except RCM30/3100, LP3500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-0542; 316-1180

1.2 Comparing the RCM3209/RCM3229 and RCM3200/RCM3220
We can no longer obtain certain components for the RCM3200/RCM3220 RabbitCore
modules that support the originally specified -40°C to +70°C temperature range. Instead of
changing the design of the RCM3200/RCM3220 RabbitCore modules to handle available
components specified for the original temperature range, we decided to develop a new
product line — the RCM3209/RCM3229 — based on the RCM3900 RabbitCore modules
that were released for the same reason.
The RCM3209/RCM3229 modules are similar in form, dimensions, and function to the
RCM3200/RCM3220 modules. We strongly recommend that existing RCM3200/RCM3220
customers and designers of new systems consider using the new RCM3209/RCM3229
RabbitCore modules.
This section compares the two lines of RabbitCore modules.
•
•
•
•
•
4
Temperature Specifications
tured after May, 2008, are specified to operate at 0°C to +70°C. The RCM3209/
RCM3229, rated for -40°C to +85°C, are offered to customers requiring a larger
temperature range after May, 2008.
Maximum Current
required by the RCM3209 (with Ethernet) or 190 mA (RCM3229 without Ethernet).
LEDs
the RCM3209 has an
RCM3229, like the RCM3220, has no LEDs and no Ethernet.
Ethernet chip.
Ethernet chip is able to detect automatically whether a crossover cable or a straight-
through cable is being used in a particular setup, and will configure the signals on the
Ethernet jack interface. The RCM3229, like the RCM3220, has no Ethernet interface.
Dynamic C
the RCM3209/RCM3229 after you recompile it using Dynamic C v. 9.60 or later. The
new Dynamic C release incorporates many of the modules that previously had to be
purchased separately.
— The
— You may run an application developed for the RCM3200/RCM3220 on
LNK
A different Ethernet controller chip is used on the RCM3209. The
/
ACT
— The RCM3200/RCM3220 draws 255 mA vs. the 325 mA
FDX
LEDs have been combined to one LED on the RCM3209, and
/
COL
— RCM3200/RCM3220 RabbitCore modules manufac-
LED where the
ACT
LED was on the
RabbitCore RCM3200
R
CM3200. The