QL4009-0PF100C ETC1 [List of Unclassifed Manufacturers], QL4009-0PF100C Datasheet - Page 13

• Manufacturer Part Number: QL4009-0PF100C
• Description: 9,000 Usable PLD Gate QuickRAM ESP Combining Performance, Density and Embedded RAM
• Manufacturer: ETC1 [List of Unclassifed Manufacturers]

© 2002 QuickLogic Corporation
The 1149.1 standard requires the following three tests:
•
•
•
Extest Instruction.
places a device into an external boundary test mode, selecting the boundary scan
register to be connected between the TAP's Test Data In (TDI) and Test Data Out (TDO)
pins. Boundary scan cells are preloaded with test patterns (via the Sample/Preload
Instruction), and input boundary cells capture the input data for analysis.
Sample/Preload Instruction.
functional mode, while selecting the boundary scan register to be connected between
the TDI and TDO pins. For this test, the boundary scan register can be accessed via a
data scan operation, allowing users to sample the functional data entering and leaving
the device.
Bypass Instruction.
scan entirely, so the data passes through the bypass register. The Bypass instruction
allows users to test a device without passing through other devices. The bypass register
is connected between the TDI and TDO pins, allowing serial data to be transferred
through a device without affecting the operation of the device.
The Extest instruction performs a PCB interconnect test. This test
The Bypass instruction allows data to skip a device's boundary
This instruction allows a device to remain in its
QL4009 QuickRAM Data Sheet Rev B
www.quicklogic.com
•
•
•
•
•
•
13