ATA5824-PLQW 80 Atmel, ATA5824-PLQW 80 Datasheet - Page 35

• Manufacturer Part Number: ATA5824-PLQW 80
• Manufacturer: Atmel

Specifications of ATA5824-PLQW 80

• Operating Temperature (min): -40C
• Operating Temperature (max): 105C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 7mm
• Product Height (mm): 0.9mm
• Product Length (mm): 7mm
• Operating Supply Voltage (typ): 5V
• Lead Free Status / Rohs Status: Compliant

10.5
11. Microcontroller Interface
12. Digital Control Logic
12.1
4829D–RKE–06/06
Car Application
Register Structure
The supply voltage range is 4.4V to 5.25V.
Figure 10-6. Car Application
The microcontroller interface is a level converter which converts all internal digital signals which
are referred to the DVCC voltage, into the voltage used by the microcontroller. Therefore, the pin
VSINT can be connected to the supply voltage of the microcontroller in the case the microcon-
troller has another supply voltage than the ATA5823/ATA5824.
The configuration of the transceiver is stored in RAM cells. The RAM contains a 16
TX/RX data buffer and a 8
interface (CS, SCK, SDI_TMDI, SDO_TMDO).
The 1
The RAM and the status information is stored as long as the transceiver is in any active mode
(DVCC = VS1) and gets lost if the transceiver is in the OFF mode (DVCC = OFF).
After the transceiver is turned on via pin PWR_ON = High or pin N_PWR_ON = Low the control
registers are in the default state.
8-bit status register is not part of the RAM and is readable via the 4-wire serial interface.
Digital control logic
RF transceiver
ATA5823/ATA5824
8-bit Control register and is write and readable via a 4-wire serial
SDO_TMDO
SDI_TMDI
VSINT
DVCC
AVCC
SCK
CLK
VS1
VS2
IRQ
CS
4.4V to 5.25V
ATA5823/ATA5824
VS
OUT
OUT
OUT
IN
IN
IN
Microcontroller
8-bit
35