20-101-1306 Rabbit Semiconductor, 20-101-1306 Datasheet - Page 22

• Manufacturer Part Number: 20-101-1306
• Description: CORE MODULE RCM5750
• Manufacturer: Rabbit Semiconductor
• Type: Serial to Ethernetr

Specifications of 20-101-1306

• Module/board Type: MPU Core Module
• Number Of I/os: 32
• Ethernet Connection Type: 10/100 Base-T
• Memory Type: Flash
• Operating Voltage: 3.3 V
• Operating Current: 70 mA
• Operating Temperature Range: - 40 C to + 85 C
• Board Size: 30 mm x 51 mm x 3 mm
• Product: Modules
• For Use With/related Products: RCM5750
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1183

The
SAMPLES\RCM6700\SERIAL
•
Before you compile and run this sample program, you will need to connect J2 pin 19 (PC0/TxD)
to J2 pin 22 (PC3/RxC) or the corresponding holes on P2.
If you are using the Serial Communication Accessory Board, you should connect pin 3 (TXD) on
header J3 to pin 5 (RXC) on header J4 instead.
MiniCore RCM5700/RCM6700 User’s Manual
SERIALTOSERIAL.C
board and lights LEDs DS1–DS4 when the corresponding pushbutton switch is pressed. LEDs
DS1–DS2 on the Digital I/O accessory board are controlled by PA4–PA7, and switches S1–S4
are controlled by PB4–PB7 respectively. The sample program sends messages from Serial Port
B to Serial Port C to indicate that a switch was pressed. Messages received by Serial Port C are
displayed in Dynamic C’s
SERIALTOSERIAL.C
—monitors switches S1, S2, S3, and S4 on the Digital I/O accessory
sample program is in the
STDIO
folder, depending on your MiniCore model.
window.
rabbit.com
SAMPLES\RCM5700\SERIAL
or
22