20-101-1306 Rabbit Semiconductor, 20-101-1306 Datasheet - Page 19

• Manufacturer Part Number: 20-101-1306
• Description: CORE MODULE RCM5750
• Manufacturer: Rabbit Semiconductor
• Type: Serial to Ethernetr

Specifications of 20-101-1306

• Module/board Type: MPU Core Module
• Number Of I/os: 32
• Ethernet Connection Type: 10/100 Base-T
• Memory Type: Flash
• Operating Voltage: 3.3 V
• Operating Current: 70 mA
• Operating Temperature Range: - 40 C to + 85 C
• Board Size: 30 mm x 51 mm x 3 mm
• Product: Modules
• For Use With/related Products: RCM5750
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1183

3.1 Introduction
To help familiarize you with the RCM5700/RCM6700 modules, Dynamic C includes several
sample programs. Loading, executing and studying these programs will give you a solid hands-on
overview of the RCM5700/RCM6700’s capabilities, as well as a quick start with Dynamic C as an
application development tool.
In order to run the sample programs discussed in this chapter and elsewhere in this manual,
1. Your RCM5700/RCM6700 must be installed on the Interface Board as described in Chapter 2,
2. Dynamic C must be installed and running on your PC.
3. The USB cable must connect the Interface Board to your PC.
4. Power must be applied to the RCM5700/RCM6700 through the Interface Board.
Refer to Chapter 2, “Getting Started,” if you need further information on these steps.
To run a sample program, open it with the
it by selecting
Mode (see Figure 4-12) and must be connected to a PC using the USB cable.
Complete information on Dynamic C is provided in the Dynamic C User’s Manual.
MiniCore RCM5700/RCM6700 User’s Manual
“Getting Started.”
To develop and debug programs for the RCM5700/RCM6700 (and for
all other Rabbit hardware), you must install and use Dynamic C. This
chapter provides a tour of its major features with respect to the
RCM5700/RCM6700.
NOTE: The sample programs assume that you have at least an elementary grasp of ANSI C. If
you do not, see the introductory pages of the Dynamic C User’s Manual for a suggested reading
list.
Run
in the Run menu (or press
3. R
UNNING
rabbit.com
File
F9
menu (if it is not still open), then compile and run
). The RCM5700/RCM6700 must be in Program
S
AMPLE
P
ROGRAMS
19