PLRXPL-VI-S24-22 JDS UNIPHASE, PLRXPL-VI-S24-22 Datasheet - Page 21

• Manufacturer Part Number: PLRXPL-VI-S24-22
• Manufacturer: JDS UNIPHASE

Specifications of PLRXPL-VI-S24-22

• Optical Fiber Type: TX/RX
• Optical Rise Time: 0.15/0.2ns
• Optical Fall Time: 0.15/0.2ns
• Operating Temperature Classification: Industrial
• Peak Wavelength: 850nm
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.63V
• Operating Temp Range: -40C to 85C
• Lead Free Status / RoHS Status: Compliant

ROHS-COMPLIANT 2.125, 1.25 AND 1.063 GBPS 850 NM TRANSCEIVER
21
3.2 Package and handling instructions
Process plug
The PLRXPL-VI-S24-22 is supplied with a dust cover. This plug protects the trans-
ceiver’s optics during standard manufacturing processes by preventing contamination
from air borne particles.
Note: It is recommended that the dust cover remain in the transceiver whenever an
optical fi ber connector is not inserted.
Recommended cleaning and de-greasing chemicals
JDSU recommends the use of methyl, isopropyl and isobutyl alcohols for cleaning.
Do not use halogenated hydrocarbons (e.g. trichloroethane, ketones such as ac-
etone, chloroform, ethyl acetate, MEK, methylene chloride, methylene dichloride,
phenol, N-methylpyrolldone).
Flammability
The PLRXPL-VI-S24-22 housing is made of cast zinc and sheet metal.
3.3 ESD Discharge (ESD)
Handling
Normal ESD precautions are required during the handling of this module. This
transceiver is shipped in ESD protective packaging. It should be removed from the
packaging and handled only in an ESD protected environment utilizing standard
grounded benches, fl oor mats, and wrist straps.
Test and operation
In most applications, the optical connector will protrude through the system chas-
sis and be subjected to the same ESD environment as the system. Once properly
installed in the system, this transceiver should meet and exceed common ESD
testing practices and fulfi ll system ESD requirements.
Typical of optical transceivers, this module’s receiver contains a highly sensitive
optical detector and amplifi er which may become temporarily saturated during
an ESD strike. This could result in a short burst of bit errors. Such an event might
require that the application re-acquire synchronization at the higher layers (e.g.
Serializer/Deserializer chip).
3.4 Eye safety
The PLRXPL-VI-S24-22 is an international Class 1 laser product per IEC 825, and
per CDRH, 21 CFR 1040 Laser Safety Requirements. The PLRXPL-VI-S24-22 is
an eye safe device when operated within the limits of this specifi cation.
Operating this product in a manner inconsistent with intended usage and specifi -
cation may result in hazardous radiation exposure.