STLC5465B STMicroelectronics, STLC5465B Datasheet - Page 96

• Manufacturer Part Number: STLC5465B
• Description: Telecom ICs Multi-HDLC Sw Matrix
• Manufacturer: STMicroelectronics
• Type: Telecom IC - Variousr

Specifications of STLC5465B

• Operating Supply Voltage: 4.75 V to 5.25 V
• Operating Temperature Range: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Package / Case: PQFP-160
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

STLC5465B
IX - EXTERNAL REGISTERS (continued)
IX.3.2 - Bits written by the DMAC only
CFT
ABT
UND
IX.3.3 - Transmit Buffer
Each transmit buffer is defined by its transmit descriptor.
The maximum size of the buffer is 2048 words (1 word=2 bytes)
Note: for Motorola processors, a swap may be necessary to read/write the Receive Buffer.
IX.4 - Receive & Transmit HDLC Frame Interrupt
This word is located in the HDLC interrupt queue ; IQSR Register indicates the size of this HDLC interrupt
queue located in the external memory.
NS
Transmitter
Tx
A4/0
RRLF : Ready to Repeat Last Frame
EOQ
HALT : The TransmitDMAController hasreceivedHALT from the microprocessor; it is waiting”Continue”
BE
CFT
96/101
bit15
NS
NBT is even : x = NBT - 2
NBT is odd : x = NBT - 1
: Frame correctly transmitted
: Frame Transmitting Aborted
: Underrun
: New Status.
: Tx = 1, Transmitter
: Tx HDLC Channel 0 to 31
: End of Queue
: Buffer Empty
: Correctly Frame Transmitted
0
CFT = 1, the Frame has been correctly transmitted.
CFT = 0, the Frame has not been correctly transmitted.
ABT = 1, the frame has been aborted by the microprocessor during the transmission.
ABT = 0, the microprocessor has not aborted the frame during the transmission.
UND = 1, the transmit FIFO has not been fed correctly during the transmission.
UND = 0, the transmit FIFO has been fed correctly during the transmission.
Before writing the features of event in the external memory the Interrupt Controller reads the
NS bit :
if NS = 0, the Interrupt Controller puts this bit at ‘1’ when it writes the status word of the frame
which has been transmitted or received.
if NS = 1, the Interrupt Controller puts ICOV bit at ‘1’ to generate an interrupt (IR Register).
When the microprocessor has read the status word, it puts this bit at ‘0’ to acknowledge the new
status. This location becomes free for the Interrupt Controller.
In consequenceof event suchas Abort Command HDLC, Controller is waiting Start or Continue.
The Transmit DMA Controller (or the Receive DMA Controller) has encountered the current
Descriptor with EOQ at ”1”. DMA Controller is waiting ”Continue” from microprocessor.
from microprocessor.
If BINT bit of Transmit Descriptor is at ‘1’, the Transmit DMA Controller puts BE at ”1” when the
buffer has been emptied.
A frame has been transmitted. This status is provided only if BINT bit of Transmit Descriptor is
at ‘1’. CFT is located in the last descriptor if several descriptors are used to define a frame.
TBA + x ;
Tx
TBA
A4
A3
A2
A1
15
SECOND BYTE TO TRANSMIT
LAST BYTE TO TRANSMIT
bit8
A0
if NBT is even
bit7
0
0
0
CFT/CFR BE/BF HALT
8
7
THIRD BYTE TO TRANSMIT
FIRST BYTE TO TRANSMIT
LAST BYTE TO TRANSMIT
if NBT is odd
EOQ RRLF/ERF
bit 0
0