EP9312-CB Cirrus Logic Inc, EP9312-CB Datasheet - Page 590

• Manufacturer Part Number: EP9312-CB
• Description: System-on-Chip Processor
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9312-CB

• Peak Reflow Compatible (260 C): No
• A/d Converter: 12 Bits
• Leaded Process Compatible: No
• No. Of I/o Pins: 65
• Package / Case: 352-BGA
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No
• Other names: 598-1257

16
16-14
UART3 With HDLC Encoder
EP93xx User’s Guide
RXENC:
SYNC:
TFCEN:
TABEN:
RFCEN:
RILEN:
RFLEN:
RTOEN:
FLAG:
CRCN:
Copyright 2007 Cirrus Logic
Receive Encoding method.
1 - Use Manchester bit encoding.
0 - Use NRZ bit encoding.
This bit has no effect unless synchronous HDLC is
enabled.
Synchronous / Asynchronous HDLC Enable.
0 - Select asynchronous HDLC for TX and RX.
1 - Select synchronous HDLC for TX and RX.
Transmit Frame Complete Interrupt Enable.
0 - TFC interrupt will not occur.
1 - TFC interrupt will occur whenever TFC bit is set.
Transmit Frame Abort Interrupt Enable.
0 - TAB interrupt will not occur.
1 - TAB interrupt will occur whenever TAB bit is set.
Receive Frame Complete Interrupt Enable.
0 - RFC interrupt will not occur.
1 - RFC interrupt will occur whenever RAB bit or EOF bit is
set.
Receive Information Lost Interrupt Enable.
0 - RIL interrupt will not occur.
1 - RIL interrupt will occur whenever RIL bit is set.
Receive Frame Lost Interrupt Enable.
0 - RFL interrupt will not occur.
1 - RFL interrupt will occur whenever RFL bit is set.
Receiver Time Out Interrupt Enable.
0 - RTO interrupt will not occur.
1 - RTO interrupt will occur whenever RTO bit is set.
Minimum number of opening and closing flags for HDLC
TX. The minimum number of flags between packets is this
4-bit value plus one. Hence, 0000b forces at least one
opening flag and one closing flag for each packet, and
1111b forces at least 16 opening and closing flags. The
closing flags of one packet may also be the opening flags
of the next one if the transmit line does not go idle in
between. Note that HDLC RX does not count flags; only
one is necessary (or three in Manchester mode).
CRC polarity control.
0 - CRC transmitted not-inverted.
1 - CRC transmitted inverted.
DS785UM1