TEF6607T/V5,518 NXP Semiconductors, TEF6607T/V5,518 Datasheet - Page 31

• Manufacturer Part Number: TEF6607T/V5,518
• Description: IC TUNER CAR RADIO AM/FM 32SOIC
• Manufacturer: NXP Semiconductors

Specifications of TEF6607T/V5,518

• Frequency: *
• Sensitivity: *
• Data Rate - Maximum: *
• Modulation Or Protocol: *
• Applications: *
• Current - Receiving: *
• Data Interface: *
• Memory Size: *
• Antenna Connector: *
• Features: *
• Voltage - Supply: *
• Operating Temperature: *
• Package / Case: 32-SOIC (0.300", 7.50mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935288264518

NXP Semiconductors
LPC3152_3154
Preliminary data sheet
6.20 Random Number Generator (RNG)
6.21 AES decryption (LPC3154 only)
6.22 Secure One-Time Programmable (OTP) memory
6.23 Serial Peripheral Interface (SPI)
The random number generator generates true random numbers for use in advanced
security and Digital Rights Management (DRM) related schemes. These schemes rely
upon truly random, i.e. completely unpredictable numbers.
This module has the following features:
This module can be used for data decryption using the AES algorithm. The AES module
has the following features:
The OTP memory can be used for storing non-volatile information like serial number,
security bits, etc. It consists of a polyfuse array, embedded data registers, and control
registers. One of the main purposes of the OTP is storing a security key and a unique ID.
This module has the following features:
The SPI module is used for synchronous serial data communication with other devices
which support the SPI/SSI protocol. Examples of the devices that this SPI module can
communicate with are memories, cameras, and WiFi-g.
•
•
•
•
•
•
•
•
•
•
•
•
True random number generator.
The random number register does not rely on any kind of reset.
The generators are free running in order to ensure randomness and security.
AES-128: 128 bit key, 128 bit data.
CBC mode over blocks of 512 bytes.
Each block of 512 bytes uses the same initial value.
AES can be turned on and off.
512-bit, one-time programmable memory
– 128 bit are used for an unique ID which is pre-programmed in the wafer fab.
– 40 bit are used for security and other features which are programmed at the
– 184 bit are available for customer use.
– 32 bit are used for USB product ID and vendor ID by boot ROM in DFU mode.
– 128 bit are for the secure key used by boot ROM to load secure images.
Programmable at the customer production line
Random read access via sixteen 32-bit registers
Flexible read protection mechanism to hide security related data
Flexible write protection mechanism
customer production line.
Remark: On the LPC3152 secure boot is not supported hence these bits are also
available for customer use.
All information provided in this document is subject to legal disclaimers.
Rev. 0.12 — 27 May 2010
LPC3152/3154
© NXP B.V. 2010. All rights reserved.
31 of 88