ST203C686MAJ03 AVX Corporation, ST203C686MAJ03 Datasheet - Page 22

• Manufacturer Part Number: ST203C686MAJ03
• Description: CAP CER 68UF 25V STACKED SMD
• Manufacturer: AVX Corporation
• Series: TurboCap™r

Specifications of ST203C686MAJ03

• Capacitance: 68µF
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Voltage - Rated: 25V
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Stacked
• Applications: Filtering Switch Mode Power Supplies
• Package / Case: 6-Stacked SMD, J-Lead
• Size / Dimension: 0.325" L x 0.300" W (8.26mm x 7.62mm)
• Thickness: 5.59mm Max
• Lead Style: J-Lead
• Voltage Rating: 25 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Product: General Type MLCCs
• Dielectric Characteristic: X7R
• Capacitance Tolerance: ± 20%
• Capacitor Case Style: DIP
• No. Of Pins: 6
• Capacitor Mounting: SMD
• Rohs Compliant: No
• Termination Style: Radial
• Lead Spacing: 6.35 mm
• Dimensions: 7.62 mm W x 8.26 mm L x 5.59 mm H
• Dissipation Factor Df: 2.5
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 478-6117

SMPS Stacked MLC Capacitors
(SM Style) DSCC #87106 and #88011
1/ Post checks are required (see paragraph 3.9 of MIL-PRF-49470).
2/ Marking defects are based on visual examination only. Any subsequent electrical defects shall not
1/ Unless otherwise specified herein, when necessary, mounting of group B samples shall be at the
2/ A sample unit having one or more defects shall be charged as a single defective.
3/ Order of tests is at discretion of manufacturer.
4/ See 3.2.3 of DSCC 87106.
5/ Sample size shall be 3 pieces with zero defectives permitted.
6/ Total of one defect allowed for combination of subgroup 1, subgroup 2, and subgroup 3 inspections.
Subgroup 1
Thermal shock and voltage conditioning 1/
Subgroup 2
Visual and mechanical examination:
Interface requirements
Marking 2/
Workmanship
Subgroup 1 3/
Temperature coefficient
Resistance to solvents 5/ 6/
Immersion
Terminal strength 5/
Subgroup 2
Resistance to soldering heat
Moisture resistance
Subgroup 3
Marking legibility
(laser marking only)
Subgroup 4
Solderability
Subgroup 5
Life
be used as a basis for determining marking defects.
discretion of the manufacturer.
Material
Physical dimensions
(other than physical dimensions)
Inspection
Inspection
MIL-PRF-49470
paragraph of
Requirement
3.28.1
Table III. Group B inspection. 1/
3.23
3.18
3.24
3.20
3.21
3.15
3.26
Table II. Group A inspection.
4/
MIL-PRF-49470
paragraph of
Requirement
3.5 and 3.5.1
3.28
3.30
3.9
3.4
3.1
MIL-PRF-49470
paragraph of
Test method
4.8.4.1
4.8.20
4.8.15
4.8.10
4.8.17
4.8.18
4.8.12
4.8.22
4/
MIL-PRF-49470
paragraph of
Test method
4.8.5
4.8.4
to be inspected
sample units
Number of
per case code
5 minimum
12
12
6
3
Sampling procedure
100% inspection
13 samples
1
1
1
permitted 2/
0 failures
Number of
defectives
0
0
6/ 1
21