ZGP32302010ZDH Zilog, ZGP32302010ZDH Datasheet - Page 22

• Manufacturer Part Number: ZGP32302010ZDH
• Description: ADAPTER ICE Z8 GP ZGP323 20SSOP
• Manufacturer: Zilog

Specifications of ZGP32302010ZDH

• Convert From (adapter End): 20-Pin DIP
• Convert To (adapter End): 20-Pin SSOP
• For Use With/related Products: Z8 GP ZGP323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3738

Page 22
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform
User Manual
14. If you do not want a serial number loaded into the part, select the None button in the
15. Click Blank Check to verify that the OTP chip is actually blank.
16. Click the Burn button to program the OTP chip with the contents of emulator RAM.
17. When the burn is complete, click OTP checksum to calculate the checksum of data on
18. Click Close to close the OTP Programming window.
LED Indicators
There are three sets of dual LED indicators on the Z8 GP ICE (see Figures 3 and 5):
•
•
•
External Interface Connectors
There are five external interface connectors on the Z8 GP ICE. Connectors P16 and P17
are used to connect the emulator to the target POD and adapter board assembly. (See Fig-
ure 4.)
The OTP Programming connector P15 is used to connect the emulator to the OTP pro-
gramming module.
LED Indicators
Method area. To load a serial number:
a. Select the Sequential or Pseudorandom button to determine how the serial number
b. Select the size of the serial number (1, 2, 3, or 4 bytes) in the Serial Number Size
c. Enter the starting serial number in the Serial Number field.
d. Enter the address into which you want the serial number loaded in the Address
As part of the Burn function, the OTP chip is also verified.
the OTP chip and compare it to the RAM checksum calculated earlier.
The dual ICE RUN LED on the front panel indicates emulator status. If the top LED is
lit, the emulator is executing your system code. When the top LED is off, emulation
has stopped. If the bottom LED is lit, the emulator is not functioning properly. Contact
technical support at http://www.zilog.com for assistance.
The dual 3.3VDC/1.8VDC LED on the rear panel indicates the status of internal volt-
ages. Both LEDs are normally illuminated when power is connected.
The dual LAN/LINK LED on the rear panel indicates Ethernet status. The LINK LED
indicates that the Ethernet connection is live. The LAN LED indicates that data is
being transferred across the connected network.
is incremented on subsequent burns.
area.
field.
UM019302-0407