ZGP32302010ZDH Zilog, ZGP32302010ZDH Datasheet - Page 14

• Manufacturer Part Number: ZGP32302010ZDH
• Description: ADAPTER ICE Z8 GP ZGP323 20SSOP
• Manufacturer: Zilog

Specifications of ZGP32302010ZDH

• Convert From (adapter End): 20-Pin DIP
• Convert To (adapter End): 20-Pin SSOP
• For Use With/related Products: Z8 GP ZGP323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3738

Page 14
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform
User Manual
9. When you have finished configuring the emulator, type
10. Exit HyperTerminal.
11. Cycle the power on the Z8 GP ICE for the new settings to take effect.
12. The hardware is now configured and ready for application development.
Running a Sample Project
After installing the ZDS II software and setting up the hardware, you can run a sample
software project to verify proper emulator operation and experiment with the trace and
event system. This section describes how to run the emulator in in-circuit mode.
The sample project ledblink_c.pro is included in the ZDS II sample directory, located in:
Start ZDS II for the Z8 GP ICE Emulator by opening
tor Kit_<revision>
1. Open the sample project file:
2. Double-click
3. Open
4. In the
Running a Sample Project
Note:
shell.
c:\Program Files\ZiLOG\ZDSII_Z8GP_Emulator_<version>
\samples\ZGP323_ledBlink\ledblink_c\src\ledblink_c.pro
c:\Program Files\ZiLOG\ZDSII_<product>_<version>
Project –> Settings
General
\samples\<processor type>_<demo name>
If you run the emulator with a target attached, be aware that the emulator’s
voltage comparator is designed as a target power sensor, not as a precision
voltage measurement device. If you set the Target VCC to match your target
and the target’s voltage drifts downward, the power sensor may no longer
detect it. The emulator may therefore not connect to the target. In such cases,
set the Target VCC voltage progressively lower until you get a good connec-
tion.
The C code example is used in the following description. An assembler ver-
sion is located in
\ZDSII_Z8GP_Emulator_Kit_<version>\samples
\ZGP323_ledBlink\ledblink_asm\src\ledblink_asm.pro
main.c
and follow the instructions below to run
tab, verify the
in the Project Files window.
.
c:\Program Files\ZiLOG
File –> Open Project –>
CPU Family
field is set to
Start > ZiLOG ZDS II-Z8 GP Emula-
ledblink_c.pro
exit
ZGP323
to exit the command
.
UM019302-0407
.
.
.