HDJD-JD05 Avago Technologies US Inc., HDJD-JD05 Datasheet - Page 7

• Manufacturer Part Number: HDJD-JD05
• Description: KIT DEV RGB COLOR SENSOR 20-QFN
• Manufacturer: Avago Technologies US Inc.

Specifications of HDJD-JD05

• Sensor Type: Light, Color Sensor
• Sensing Range: RGB
• Interface: 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 3.6 V
• Embedded: No
• Utilized Ic / Part: ADJD-S313-QR999
• For Use With/related Products: ADJD-S313-QR999
• Lead Free Status / RoHS Status: Not applicable / Not applicable

4.0 Hardware Setup & Configuration
Setup:
1. Connect the power adapter to the adapter socket.
2. Connect the USB cable from the computer to the
3. Connect the sensor module to the controller board.
The diagonal mark
indicates pin 1
Figure 4.0: The right orientation to connect the sensor module to controller board
Figure 4.1: Controller board with all interface connected

Label indicates
which side is pin 1
Precaution: The demo is tested working properly with
the AC adapter provided. Avago Technologies shall not
be liable to any improper operation of demo with other
types of AC adapter.
controller board.
Make sure the orientation is correct by looking at the
label ‘Pin 1’ on the cable is actually connected to label
J3 at the board. Also notice than pin 10 that is without
cable is connected to NC.
The right orientation