HDJD-JD05 Avago Technologies US Inc., HDJD-JD05 Datasheet

Page 1

Development Kit User Guide Contents: Disclaimer, Warning, Credit 1.0 Introduction 2.0 Startup 3.0 Color Sensor Module 3.1 Digital Color Sensor Controller Board 4.0 Hardware Setup & Configuration 5.0 PC Software Description Copyright © 2005 Avago Technologies, Inc. All Rights Reserved. ...

Page 2

... RELIABILITY ASSESSMENT AND AVAGO IS NOT LIABLE.  Warning DO NOT CONNECT OR DISCONNECT ANYTHING WHILE THE HDJD-JD05 DEVELOPMENT KIT OR THE PC IS SWITCHED ON!!! Doing so anyway may damage your PC and/or the HDJD-JD05 Development Kit permanently. Make sure power is off while interfacing with the Control- ler Board. DO NOT & never switch off power from control- ler board while program is running ...

Page 3

... Other applications include color measurement in portable medical instruments and color detectors and readers. The Avago sensor development kit, HDJD-JD05 is used as a guide to the application of ADJD-S313 besides demonstrating the principle of color sensing. The color sensor can be used for both transmissive and reflective sensing ...

Page 4

Color Sensor Module The color sensor module comprises an illuminant, digital color sensor and the mechanical block. The Avago white LED (HSMW-C191) is used as the illuminant/light source and digital color sensor (ADJD-S313-QR999) as the detec- tor. The mechanical ...

Page 5

... Figure 3. outputs of the sensor is determined by color of light falling on the sensor Figure 3.3: Apply color sensor on media such as color filter, gas or liquid To use HDJD-JD05 in transmissive mode, the white LED should be turn off with the slider switch at the digital color sensor controller board. ...

Page 6

LED Constant Current Module This module provides four selectable current 5mA, 10mA, 15mA and 20mA to the white LED. Figure 3.6: LED Constant Current Block Diagram Digital Color Sensor Reset and Sleep Module Consists reset and sleep circuit for digital ...

Page 7

Hardware Setup & Configuration Setup: 1. Connect the power adapter to the adapter socket. Precaution: The demo is tested working properly with the AC adapter provided. Avago Technologies shall not be liable to any improper operation of demo with ...

Page 8

To power on: 1. Turn on the power switch (SW1). The red LED will light up to indicate there is power supply to the board. 2. The green LED will light up if the USB cable is con- nected indicating ...

Page 9

... CD-ROMs are commonly “D:”. The installation program will guide you through the software installation. How to use the software For the instructions on how to use the software, please refer to the HDJD-JD05 Software User Guide which is also available in the CD. ...

Page 10

For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright ...