HDJD-JD06 Avago Technologies US Inc., HDJD-JD06 Datasheet - Page 12

• Manufacturer Part Number: HDJD-JD06
• Description: KIT DEV RGB COLOR SENSOR 16-QFN
• Manufacturer: Avago Technologies US Inc.

Specifications of HDJD-JD06

• Sensor Type: Light, Color Sensor
• Sensing Range: RGB
• Interface: Analog
• Voltage - Supply: 4.5 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: ADJD-E622-QR999
• For Use With/related Products: ADJD-E622-QR999
• Lead Free Status / RoHS Status: Not applicable / Not applicable

5.1
The following is the step by step procedure to activate
the color chart and color conversion. To make sure that
the conversion is correct, the procedure should be strictly
followed.
1. First, select the LED current to 20mA. Refer to section
2. Select all the sensor gains to ‘1’ which means put the
Figure 5.1: Select all sensor gain to ‘1’
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved.
AV01-0358EN - July 4, 2007
4.0 on how to select the LED current.
dip switch to the position as shown in the picture be-
low. (Refer to section 4.0 for how to select the gain)
Activation of Color Chart/ Conversion
GND '0'
NC '1'
3. Check the checkbox “Activate color chart/ conversion”
www.avagotech.com
and then click “Start” button. A message box will ap-
pear, click Yes to confirm all procedure correctly done.
The color conversion and real time CIE xy chart is now
activated.
Note: Do not adjust the trimmers at the controller board. The trim-
mers are calibrated at the factory for optimum color conversion.