M3A-2114G62 Renesas Electronics America, M3A-2114G62 Datasheet - Page 32

• Manufacturer Part Number: M3A-2114G62
• Description: DEV M32171 (MCU SOCKET TYPE) STA
• Manufacturer: Renesas Electronics America
• Type: MCUr

Specifications of M3A-2114G62

• Contents: Board, Serial Cable, C Compiler, Debugger, Programmer and Documentation
• For Use With/related Products: M32171
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
5.3 Hardware Setup when the Evaluation Board by Itself in Use
Jumper Name
JP1
JP2
JP3
Before feeding power, make sure jumper switches are set as bellow.
5.3.1 M3A-2114 Evaluation Board Power Supply and Settings
The following shows how to set the M3A-2114 Evaluation Board.
Use a 5V DC power supply to feed power to the M3A-2114 Evaluation Board.
Use an included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the
M3A-2114 Evaluation Board.
The method for connecting them is shown in Figure 5.3-1.
5.3.2 M3A-2114 Power Supply
Connecting the 5V power supply with the included cable turns the M3A-2114 Evaluation Board powered on.
By disconnecting it, the M3A-2114 Evaluation Board turns powered off.
Jumper Settings
Shorted between 1-2
Shorted between 1-2
Shorted between 1-2
Figure 5.3-1 Feeding Power to the M3A-2114 Evaluation Board
M3A-2114 evaluation board
LED1
Table 5.3-1 Jumper Settings before Shipment
JP3
JP2
JP1
Remarks
Uses power from CN2 connector to AVCC power supply
Uses power from CN2 connector to the voltage regulator
Uses power from the voltage regulator to VCCI power supply
CN2
4.75 - 5.25V DC power supply
M3A-2114 User’s Manual (30/68)
Hardware Setup