M3A-2114G62 Renesas Electronics America, M3A-2114G62 Datasheet - Page 28

• Manufacturer Part Number: M3A-2114G62
• Description: DEV M32171 (MCU SOCKET TYPE) STA
• Manufacturer: Renesas Electronics America
• Type: MCUr

Specifications of M3A-2114G62

• Contents: Board, Serial Cable, C Compiler, Debugger, Programmer and Documentation
• For Use With/related Products: M32171
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
5. Hardware Setup
5.1 Hardware Setup when M3A-2114G52A/ G62A/ G72A in use
This chapter describes how to set up the hardware components necessary to use the Starter Kit.
Table 5.0-1 and Table 5.0-2 show how to set up the hardware components.
Connect the host PC and emulator.
Setup Procedure
Turn off the evaluation board.
Turn off the emulator.
Connect the evaluation board and
5.1.1 M32100T-EZ-E Power Supply and Settings
The following shows how to set M32100T-EZ-E.
For more details, refer to M32100T-EZ-E User’s Manual.
M32100T-EZ-E is supplied power from the host PC via USB cable, and it turns ON by connecting included USB
cable.
The method for connecting them is shown in Figure 5.1-1
Turn on the evaluation board.
Set the evaluation board.
Turn on the emulator.
Set the emulator.
Setup Procedure
emulator.
Figure 5.1-1 Feeding Power to M32100T-EZ-E
Table 5.0-2 Hardware power OFF Procedure
Table 5.0-1 Hardware Setup Procedure
When connected to the emulator
1st (Refer to 5.1.4)
2nd (Refer to 5.1.4)
2nd (Refer to 5.1.1)
3rd (Refer to 5.1.2)
4th (Refer to 5.1.3)
5th (Refer to 5.1.4)
6th (Refer to 5.1.4)
1st (Refer to 5.1.1)
M3A-2114G52A/
G62A/ G72A
When connected to the emulator
M32100T-EZ-E
USB I/F
2nd (Refer to 5.2.2)
3rd (Refer to 5.2.3)
1st (Refer to 5.2.1)
4th (Refer to 5.2.4)
5th (Refer to 5.2.5)
6th (Refer to 5.2.5)
M3A-2114G52/
G62/ G72
USB cable
When using the evaluation
M3A-2114G52A/ G62A/G72A,
board by itself
1st (Refer to 5.3.2)
-
When using the evaluation
M3A-2114G52/ G62/ G72
Connect to the host
PC’s USB port
M3A-2114 User’s Manual (26/68)
2nd (Refer to 5.3.2)
1st (Refer to 5.3.1)
board by itself
-
-
-
-
Hardware Setup