M3A-2114G62 Renesas Electronics America, M3A-2114G62 Datasheet - Page 31

• Manufacturer Part Number: M3A-2114G62
• Description: DEV M32171 (MCU SOCKET TYPE) STA
• Manufacturer: Renesas Electronics America
• Type: MCUr

Specifications of M3A-2114G62

• Contents: Board, Serial Cable, C Compiler, Debugger, Programmer and Documentation
• For Use With/related Products: M32171
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
Use included 10-pin Flat cable and M3A-2191 to connect M3A-2195 and CN8 connector included with the M3A-2114
Evaluation Board.
The method for connecting M3A-2195 and the M3A-2114 Evaluation Board is shown in Figure 5.2-4.
Jumper Name
JP1
JP2
JP3
5.2.3 M3A-2114 Evaluation Board Power Supply and Settings
The following shows how to set the M3A-2114 Evaluation Board.
Use a 5V DC power supply to feed power to the M3A-2114 Evaluation Board.
Use included 5V power supply cable to connect the 5V DC power supply and CN2 connector included with the
M3A-2114 Evaluation Board. The method for connecting them is shown in Figure 5.1-3.
5.2.4 Connecting M3A-2114 Evaluation Board and M3A-2195
5.2.5 System Power-on Sequence when M3A-2114G52/ G62/ G72 in use
- When turning on power, turn on M3A-2195 first and then the M3A-2114 Evaluation Board, or simultaneously.
- When turning off power, turn off the M3A-2114 Evaluation Board first and then M3A-2195, or simultaneously.
- When turning on power again after turning off power, wait for 2 seconds.
Note: Unless the Starter Kit is powered on this sequence, the kit may operate erratically or break down.
Jumper Settings
Shorted between 1-2
Shorted between 1-2
Shorted between 1-2
JTAG
Figure 5.2-4 Connecting M3A-2114 Evaluation Board and M3A-2195
Figure 5.1-3 Feeding Power to the M3A-2114 Evaluation Board
M3A-2114 evaluation board
LED1
Table 5.2-1 Jumper Settings before Shipment
M3A-2195
JP3
JP2
10 pin flat cable
JP1
Remarks
Uses power from CN2 connector to AVCC power supply
Uses power from CN2 connector to the voltage regulator
Uses power from the voltage regulator to VCCI power supply
CN2
M3A-2191 connector pitch converter
4.75 - 5.25V DC power supply
M3A-2114 evaluation board
CN8
M3A-2114 User’s Manual (29/68)
Hardware Setup