101-1017 Rabbit Semiconductor, 101-1017 Datasheet - Page 22

• Manufacturer Part Number: 101-1017
• Description: KIT DEV POWERCORE 3800 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: PowerCore FLEXr
• Type: MPU Moduler

Specifications of 101-1017

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: PowerCore 38xx
• Interface Type: Ethernet
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.5 Where Do I Go From Here?
If the sample program ran fine, you are now ready to go on to other sample programs and to
develop your own applications. The source code for the sample programs
you to modify them for your own use. This manual also provi
ence information and describes the software function calls for the
ules
For advanced development topics, refer to the Dynamic C User’s Manual and the
Dynamic C TCP/IP User’s Manual, also in the online documentation set.
2.5.1 Standalone Operation of the PowerCore Module
Once the PowerCore module has been programmed successfully, remove the program-
ming cable from the programming connector and reset the PowerCore module. The Pow-
erCore module may be reset by removing, then reapplying power, or by pressing the
RESET
PowerCore module may now be removed from the Prototyping Board for end-use
installation.
2.5.2 Technical Support
If there are any problems at this point:
• Use the Dynamic C
• Check the Rabbit Semiconductor Technical Bulletin Board at
• Use the Technical Support e-mail form at www.rabbit.com/support/.
14
www.rabbit.com/support/bb/.
, the Prototyping Board, and the optional LCD/keypad module.
NOTE: If you purchased your PowerCore through a distributor or through a Rabbit Semi-
button on the Prototyping Board if it is connected to the Prototyping Board. The
conductor partner, contact the distributor or partner first for technical support.
CAUTION: Disconnect power to the
removing or installing your
shorts across the pins or damage to the
plugged in correctly. Do not reapply power until you have verified that the
Core module
Help
is plugged in correctly.
menu to get further assistance with Dynamic C.
PowerCore module
PowerCore module
PowerCore module
to protect against inadvertent
des complete hardware refer-
PowerCore FLEX mod-
or other boards when
if the pins are not
is provided to allow
PowerCore FLEX
Power-