STEVAL-MKI062V2 STMicroelectronics, STEVAL-MKI062V2 Datasheet - Page 18

• Manufacturer Part Number: STEVAL-MKI062V2
• Description: BOARD EVAL FOR MEMS SENSORS
• Manufacturer: STMicroelectronics
• Series: iNEMOr

Specifications of STEVAL-MKI062V2

• Design Resources: STEVAL-MKI062V2 Gerber Files STEVAL-MKI062V2 Schematic STEVAL-MKI062V2 Bill of Materials
• Sensor Type: Accelerometer, Gyroscope, Magnetometer, Pressure, Temperature
• Sensing Range: ±2g,4g,8g; 300 ~ 1100mbar; 300°/sec; -55 ~125°C
• Interface: I²C, USB
• Sensitivity: Multiple
• Voltage - Supply: 5V, USB
• Embedded: Yes, MCU, 32-Bit
• Utilized Ic / Part: LPR430AL, LY330ALH, LSM303DLH, LPS001DL, STM32F103RE, STLM75
• Interface Type: USB, CAN, I2C
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Silicon Manufacturer: STMicroelectronics
• Kit Application Type: Sensor
• Application Sub Type: MEMS Device
• Silicon Family Name: INEMO
• Kit Contents: MicroSD Card Slot, COM Connector, Reset Button,
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: STM32F103RE
• Other names: 497-10508

Hardware layout and configuration
2.13
2.14
18/27
USB
The STEVAL-MKI062V2 is provided with USB 2.0 compliant full-speed communication via a
USB type mini-B receptacles connector (CN1), with dedicated EMI Filter and line
termination through the USBUF02W6 (U5). The PA10 pin of the STM32F103 is used for
software connection/disconnection of the USB cable. The MCU pins are configured in output
push-pull mode: when high, the USB communication is enabled; when low, it is disabled.
Figure 15. USB mini-B connector (CN1) and schematic
Table 11.
User LED and button
In the STEVAL-MKI062V2 demonstration board, one D3 LED and one SW2 push button are
available for user applications.
Table 12.
USB mini-B connector pin-out
User LED and button GPIO
PIN number
Device
SW2
D3
1
2
3
4
5
Doc ID 17418 Rev 1
Vbus (power)
Description
MCU GPIO
DM (PA11)
DP(PA12)
Ground
PC13
N.C.
PB9
UM0937