HI5760EVAL1 Intersil, HI5760EVAL1 Datasheet - Page 16

• Manufacturer Part Number: HI5760EVAL1
• Description: EVALUATION PLATFORM SOIC HI5760
• Manufacturer: Intersil

Specifications of HI5760EVAL1

• Number Of Dac's: 1
• Number Of Bits: 10
• Outputs And Type: 1, Differential
• Sampling Rate (per Second): 125M
• Data Interface: Parallel
• Settling Time: 35ns
• Dac Type: Current
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: HI5760
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Pin Descriptions
PIN NO.
11-14
1-10
15
16
17
18
19
20
21
22
23
24
25
26
27
28
D9 (MSB) Through
PIN NAME
D0 (LSB)
COMP1
REFLO
SLEEP
FSADJ
REFIO
IOUTB
IOUTA
DCOM
ACOM
AV
DV
CLK
NC
NC
NC
DD
DD
16
Digital Data Bit 9 (Most Significant Bit) through Digital Data Bit 0, (Least Significant Bit).
No Connect. Recommend ground.
Control Pin for Power-Down mode. Sleep Mode is active high; Connect to ground for Normal Mode. Sleep
pin has internal 20µA active pulldown current.
Connect to analog ground to enable internal 1.2V reference or connect to AV
reference.
Reference voltage input if internal reference is disabled. Reference voltage output if internal reference is
enabled. Use 0.1µF cap to ground when internal reference is enabled.
Full Scale Current Adjust. Use a resistor to ground to adjust full scale output current. Full Scale Output
Current = 32 x V
For use in reducing bandwidth/noise. Recommended: connect 0.1µF to AV
Analog Ground.
The complimentary current output of the device. Full scale output current is achieved when all input bits
are set to binary 0.
Current output of the device. Full scale output current is achieved when all input bits are set to binary 1.
Internally connected to ACOM via a resistor. Recommend leave disconnected. Adding a capacitor to
ACOM for upward compatibility is valid. Grounding to ACOM is valid. (For upward compatibility to 12-bit
and 14-bit devices, pin 23 needs the ability to have a 0.1µF capacitor to ACOM.)
Analog Supply (+3V to +5V).
No Connect. (For upward compatibility to 12 and 14b devices, pin 25 needs to be grounded to ACOM.)
Digital Ground.
Digital Supply (+3V to +5V).
Input for clock. Positive edge of clock latches data.
FSADJ
/R
SET
HI5760
.
PIN DESCRIPTION
DD
DD
.
to disable internal