ADC08D1500DEV/NOPB National Semiconductor, ADC08D1500DEV/NOPB Datasheet - Page 19

• Manufacturer Part Number: ADC08D1500DEV/NOPB
• Description: BOARD DEV FOR ADC08D1500
• Manufacturer: National Semiconductor
• Series: PowerWise®r

Specifications of ADC08D1500DEV/NOPB

• Mfg Application Notes: Clocking High-Speed A/D Converters AppNote
• Number Of Adc's: 2
• Number Of Bits: 8
• Sampling Rate (per Second): 1.5G
• Data Interface: Serial
• Inputs Per Adc: 1 Differential
• Input Range: 870 mVpp
• Power (typ) @ Conditions: 1.8W @ 1.5GSPS
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: ADC08D1500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ADC08D1500DEV

19
DC_Coup
AC Coupling – The I Channel is AC coupled to the ADCs input
DC Coupling – The I Channel is DC coupled to the ADCs input (not available on AC only model)
Ext_Clock
Internal Clock – The ADC is clocked using the on-board 1.5GHz clock
External Clock – The ADC is clocked from an External clock source connected to the “CLOCK” input.
Reset FPGA
This button resets the FPGA, and also returns all the pulldown tabs to their default values.
Calibrate ADC
This button issues an on-command calibration to the ADC by toggling the ADCs calibrate pin.
9.3 Serial Control Mode
When the Hardware/Serial Control tab is selected as “Serial Register Program”, the control panel display
will be changed to the following view.
In this mode the register settings can be changed simply by clicking on the bits. Doing so will toggle the bit
value and any linear values such as Full Scale Range or Offset will automatically be updated.
The “Reset Registers” button at the bottom of the Control Panel will reset and write all the values to the
power-on default settings.
Please refer to the ADC08D1500 datasheet for a full description of the ADCs internal registers.