EVB9221-MINI SMSC, EVB9221-MINI Datasheet - Page 52

• Manufacturer Part Number: EVB9221-MINI
• Description: EVALUATION BOARD LAN9221-ABZJ
• Manufacturer: SMSC

Specifications of EVB9221-MINI

• Main Purpose: Interface, Ethernet Controller (PHY and MAC)
• Embedded: No
• Utilized Ic / Part: LAN9221
• Primary Attributes: 1 Port, 100BASE-TX/10BASE-T
• Secondary Attributes: 16-Bit, HP Auto-MDIX, Full and Half Duplex Support, 32-Bit CRC
• Processor To Be Evaluated: LAN9221
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 638-1074

Revision 2.7 (03-15-10)
3.12.2
Figure 3.14, "TX Buffer
should be noted that not all of the data shown in this diagram is actually stored in the TX data FIFO.
This must be taken into account when calculating the actual TX data FIFO usage. Please refer to
Section 3.12.5, "Calculating Actual TX Data FIFO Usage," on page 56
calculating the actual TX data FIFO usage.
TX Command Format
The TX command instructs the TX FIFO controller on handling the subsequent buffer. The command
precedes the data to be transmitted. The TX command is divided into two, 32-bit words; TX command
‘A’ and TX command ‘B’.
There is a 16-bit packet tag in the TX command ‘B’ command word. Packet tags may, if host software
desires, be unique for each packet (i.e., an incrementing count). The value of the tag will be returned
in the RX status word for the associated packet. The Packet tag can be used by host software to
uniquely identify each status word as it is returned to the host.
Both TX command ‘A’ and TX command ‘B’ are required for each buffer in a given packet. TX
command ‘B’ must be identical for every buffer in a given packet. If the TX command ‘B’ words do not
match, the Ethernet controller will assert the Transmitter Error (TXE) flag.
Host Write
Order
2nd
3rd
Last
1st
Format", shows the TX Buffer as it is written into the LAN9221/LAN9221i. It
Figure 3.14 TX Buffer Format
31
DATASHEET
Offset + Data DWORD0
Optional offset DWORD0
Optional offset DWORDn
Optional Pad DWORDn
Optional Pad DWORD0
TX Command 'B'
TX Command 'A'
Last Data & PAD
52
High-Performance 16-bit Non-PCI 10/100 Ethernet Controller with Variable Voltage I/O
.
.
.
.
.
.
.
.
.
.
.
0
for a detailed explanation on
SMSC LAN9221/LAN9221i
Datasheet