EVAL6206N STMicroelectronics, EVAL6206N Datasheet - Page 7

• Manufacturer Part Number: EVAL6206N
• Description: EVAL BOARD FOR L6206N DIP
• Manufacturer: STMicroelectronics

Specifications of EVAL6206N

• Mfg Application Notes: PractiSPIN AppNote
• Design Resources: EVAL6206N/6206N Gerber Files EVAL6206N Schematic/Bill of Materials
• Main Purpose: Power Management, H Bridge Driver (Internal FET)
• Embedded: No
• Utilized Ic / Part: L6205N DIP
• Primary Attributes: Dual Full-Bridge (H-Bridge), 2.8A (5.6A Peak). 8 ~ 52 V, 0.3 Ohm
• Secondary Attributes: Non-Inverting, Can be Paralleled
• Architecture: Analog
• Applications: Motor Control
• Processor To Be Evaluated: L6206
• For Use With: 497-4138 - EVALUATION BOARD PRACTISPIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5487

UM0240
2
Power supply
Board components require the following voltage supplies.
Table 1.
These supplies are all derived from an input power supply that can be taken from four
different sources:
1.
2.
3.
4.
This enhanced flexibility of source and source voltage selection coexists due to diodes D7,
D8, D10 and D12, which prevent the reverse current flowing in the supply inputs, keeping
different sources independent.
The higher voltage input will be the dominant supply.
LED D11 is turned on when the power supply is active.
OpAmp negative
Programming
Main Power
MCU Flash
Function
PLM 10V: connected to the 10V line of the PLM connector
5V Motor: connected to the 5V line of the Motor connector
Phone Jack: external connector, compatible with common notebook power supply
connectors, bringing power supply in the 5V÷ 35V range
USB 5V: connected to the 5V line of the USB supply
Supply
supply
Voltages present on board
Supply
VDD
VPP
-5V
Non regulated
Charge Pump
Charge Pump
Converter
Regulated
Converter
Converter
Switching
(Buck)
ST662A (pin VOUT)
ST662A (pin C1-)
L5973D
Device
Input Range
5V ÷ 35V
Vdd
Vdd
Power supply
Output Value
12V
5V
-5
7/39