EVAL6206N STMicroelectronics, EVAL6206N Datasheet - Page 26

• Manufacturer Part Number: EVAL6206N
• Description: EVAL BOARD FOR L6206N DIP
• Manufacturer: STMicroelectronics

Specifications of EVAL6206N

• Mfg Application Notes: PractiSPIN AppNote
• Design Resources: EVAL6206N/6206N Gerber Files EVAL6206N Schematic/Bill of Materials
• Main Purpose: Power Management, H Bridge Driver (Internal FET)
• Embedded: No
• Utilized Ic / Part: L6205N DIP
• Primary Attributes: Dual Full-Bridge (H-Bridge), 2.8A (5.6A Peak). 8 ~ 52 V, 0.3 Ohm
• Secondary Attributes: Non-Inverting, Can be Paralleled
• Architecture: Analog
• Applications: Motor Control
• Processor To Be Evaluated: L6206
• For Use With: 497-4138 - EVALUATION BOARD PRACTISPIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5487

Firmware
10
10.1
26/39
Firmware
The ST Industrial Communication Board FirmWare provides two main functions:
1.
2.
Device firmware upgrade
The DFU (Device Firmware Upgrade) feature enables the user to upgrade the application-
specific firmware on the Industrial Communication Board through the PC USB port.
The DFU procedure is performed, on the PC side, by a DFU application. The application
lists all the connected DFU devices. Once selected, the DFU USB device to be upgraded
and loaded (through the command File→ Open) using a DFU firmware image, the device can
be upgraded by pressing the Upgrade button.
Figure 14. DFU graphic user interface
In normal operation mode, the Industrial Communication Board is not DFU capable. In order
to enable the DFU capability of the device, the following two procedures are available:
●
●
Upgrading the on-board firware stored in the Flash memory
Providing application-specific code that enables communication with different
application boards
Hardware DFU Mode setting: Press and release the RES button on the Industrial
Communication Board while holding the SW1 switch down.
Software DFU Mode Setting: Send a SetDFUMode command using the application-
specific software. (See the application specific software description to check the
availability of this command).
UM0240