MCP215X/40EV-DB Microchip Technology, MCP215X/40EV-DB Datasheet - Page 77

• Manufacturer Part Number: MCP215X/40EV-DB
• Description: BOARD DEMO FOR MCP215X/40
• Manufacturer: Microchip Technology

Specifications of MCP215X/40EV-DB

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150, MCP2155, MCP2140
• Primary Attributes: PICDEM™ Demo Board Interface
• Processor To Be Evaluated: MCP21x
• Interface Type: UART
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

E.2
© 2006 Microchip Technology Inc.
MCP215X/40 DEVELOPER’S DAUGHTER BOARD PCB REV 2 ERRATA
Figure E-6 shows how to determine the revision of the MCP215X/40 Developer’s
Daughter Board PCB. This errata only applies to Revision 2 (R2) of the PCB.
FIGURE E-6:
Programming the PICDEM FS USB board (such as with the MPLAB
when the MCP215X/40 Developer’s Daughter Board is plugged into the J6 header.
There are two alternatives. These are:
1. When programming the PICDEM FS USB board, unplug the MCP215X/40
2. Cut a trace on the MCP215X/40 Developer’s Daughter Board PCB.
FIGURE E-7:
Note:
Developer’s Daughter Board from the J6 header.
Using the MCP215X/40 Developer’s Daughter Board
If the trace is cut, this signal must be reconnected if returning to the
PICDEM HPC Demo Board and using the 00077 - HPC.asm program. It
may also be desirable for user specified programs.
TOP
TOP
BOARD REVISION INDICATOR
BOARD ECN FOR USE WITH THE PICDEM™ FS USB
BOARD
with the PICDEM™ FS USB Demo Board
BOTTOM
BOTTOM
Cut this trace.
This disconnects
RE3 from RC2
and MODE1.
H1 RC2 and
RE3 are also
disconnected
from MODE1.
®
DS51591A-page 73
ICD 2) occurs
Revision
indicator