ATDVK90CAN1 Atmel, ATDVK90CAN1 Datasheet - Page 37

• Manufacturer Part Number: ATDVK90CAN1
• Description: KIT DEV FOR AT90CAN128 MCU
• Manufacturer: Atmel

Specifications of ATDVK90CAN1

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: AT90CAN AVR Devices
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: AT90CAN
• Data Bus Width: 8 bit
• Interface Type: RS-232, SPI, TWI
• Core Architecture: AVR
• Core Sub-architecture: AVR UC3
• Kit Contents: Board, AT90CAN128 Sample Microcontroller, 9V Battery Power Cable, CD-ROM, Manuals
• Features: RS232, CAN, LIN, SPI & TWI Serial Interface
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.9.2
3.9.3
DVK90CAN1 Hardware User Guide
Programming with STK500
Programming with AVR JTAG ICE
The AT90CAN128 can be programmed using the serial programming mode in the AVR
Studio STK500 software. The software interface (In-System Programming of an external
target system) is integrated in AVR Studio®.
To program the device using ISP from STK500, connect the 6-wire cable between the
ISP6PIN connector of the STK500 board and the ISP connector of the DVK90CAN1 as
shown in Figure 3-43.
Note:
Figure 3-43 . Programming from STK500
The AT90CAN128 can be programmed using specific JTAG link. This sub section will
explain how to connect and use the AVR JTAG ICE.
Note:
See AVR Studio® on-line Help for information.
When the JTAGEN Fuse is unprogrammed, the four TAP pins are normal port pins, and
the TAP controller is in reset. When programmed, the input TAP signals are internally
pulled high and the JTAG is enabled for Boundary-scan and programming. The
AT90CAN128 device is shipped with this fuse programmed.
2
1
4
3
6
5
(top view)
ISP CON
Using the DVK90CAN1
4381A–AVR–Sept 04
page 35