MAP80-1012 POWER ONE, MAP80-1012 Datasheet - Page 2

• Manufacturer Part Number: MAP80-1012
• Description: PWR SUPPLY
• Manufacturer: POWER ONE
• Series: MAP80r

Specifications of MAP80-1012

• Voltage - Output: 12V
• Number Of Outputs: 1
• Power (watts): 80W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 100 ~ 120VAC
• Mounting Type: Chassis Mount
• 1st Output: 12 VDC @ 7.5A
• Size / Dimension: 7.2" L x 4.2" W x 1.8" H (182.9mm x 106.7mm x 45.7mm)
• Power (watts) - Rated: 110W
• Operating Temperature: 0°C ~ 50°C
• Efficiency: 75%
• Approvals: CE, CSA, EN, TUV, UL
• Line Regulation: 0.2%
• Load Regulation: ±1%
• Product: Switching
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q1139213

Multiple Output Model Selection (Cont.)
MAP80-4010
MAP80-4020
NOTES:
MCD10144 Rev. 1.0, 02-Feb-10
Input Specifications
PARAMETER
Input Voltage - AC
Input Frequency
Brown Out Protection
Hold-up Time
Input Current
Input Protection
Inrush Surge Current
Operating Frequency
Output Specifications
PARAMETER
Efficiency
Minimum Loads
Ripple and Noise
Output Power
Overshoot / Undershoot
Regulation
Transient Response
Turn-On Delay
Turn-on Rise Time
Interface Signals and Internal Protection
PARAMETER
Overvoltage
Protection
Overload Protection
Power Fail
Warning (Note 1)
NOTES:
MODEL
Model numbers highlighted in yellow or shaded are not recommended for new designs.
1) Peak loads up to 90 Watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 90 Watts.
2) Maximum peak to peak noise expressed as a percentage of output voltage, 20MHz bandwidth.
1) Power Fail Warning is not available on MAP80-1024. The MAP80-1012 is an open collector output, capable of sinking 35 mA, maximum.
VOLTAGE
OUTPUT
+12V
+12V
-12V
-12V
+5V
+5V
-5V
-5V
11.52V to 12.48V
11.52V to 12.48V
4.8V to 5.5V
4.8V to 5.5V
CONDITIONS/DESCRIPTION
Continuous input range.
AC input.
Lowest AC input voltage that regulation is maintained with full rated loads.
Nominal AC input voltage (115VAC), full rated load.
90 VAC (80W load).
110VAC (80W load).
Non-user serviceable internally located AC input line fuse.
Internally limited by thermistor. Vin = 264VAC (one cycle). 25° C.
Switching frequency of power supply (varies with load).
CONDITIONS/DESCRIPTION
Full load, 115VAC. Varies with distribution of loads among outputs.
MAP80-1012
MAP80-1024
MAP80-1005 and all multiple output models, main channel only.
Full load, 20MHz bandwidth.
Continuous output power, all multiple output models.
Peak output power (60s maximum, 10% duty cycle), all multiple output models.
Output voltage overshoot/undershoot at turn-on, V1, V2.
Varies by output. Total regulation includes: line changes from 90-132 VAC
or 175-264, changes in load starting at 20% load and changing to 100% load.
Recovery time, to within 1% of initial set point due to a 50-100%
load change, 4% max. deviation. (Main output of multiple output units).
Time required for initial output voltage stabilization.
Time required for output voltage to rise from 10% to 90%.
CONDITIONS/DESCRIPTION
Provided on MAP80-1005 and the main output of multiple output units.
Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition.
TTL compatible logic signal. Time before regulation dropout
due to loss of input power at 110VAC.
ADJUSTMENT
RANGE
Fixed
Fixed
Fixed
Fixed
CURRENT
OUTPUT
14A
14A
4A
1A
3A
4A
1A
3A
–
80W Continuous Output Power
Page 2 of 4
CURRENT (NOTE 1)
PEAK OUTPUT
16A
16A
7A
1A
3A
7A
1A
3A
MAP80 AC-DC Series Data Sheet
REGULATION
0.2%
0.2%
0.5%
0.5%
0.2%
0.2%
0.5%
0.5%
LINE
MAP80-1012
MAP80-1024
REGULATION
LOAD
1%
1%
2%
2%
1%
1%
2%
2%
0.42
0.21
1.00
175
MIN
MIN
MIN
5.5
90
47
90
20
22
73
17
32
1
4
RIPPLE & NOISE
%p-p (NOTE 2)
1%
1%
1%
1%
1%
1%
1%
1%
NOM
NOM
NOM
75
See Model Selection Chart.
See Model Selection Chart.
www.power-one.com
-11.5V to -12.5V
-11.5V to -12.5V
MAX
135
264
120
MAX
500
MAX
2.5
1.8
6.8
45
80
80
90
12.0V to 12.1V
12.0V to 12.1V
63
20
23
37
-4.8V to -5.4V
-4.8V to -5.4V
1
5
INITIAL SETTING
5.1V to 5.2V
5.1V to 5.2V
ACCURACY
Amps
Watts
Watts
UNITS
A
UNITS
UNITS
VAC
VAC
A
kHz
Sec
mS
mS
mS
Hz
µS
RMS
%
%
V
PK