AFCT-701SDZ Avago Technologies US Inc., AFCT-701SDZ Datasheet - Page 5

• Manufacturer Part Number: AFCT-701SDZ
• Description: TXRX SFP+ SMF 10BGD 1310NM
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFCT-701SDZ

• Data Rate: 10.312Gbd
• Wavelength: 1310nm
• Applications: Ethernet
• Voltage - Supply: 3.135 V ~ 3.465 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• For Use With Fiber Type: Multimode
• Function: SFP+ 10 Gb ethernet transceiver
• Maximum Forward Current: 289 mA
• Maximum Power Dissipation: 1000 mW
• Transmission Distance: 10 Km
• Product: Transceiver
• Diode Capacitance: 14 pF
• Maximum Rise Time: 28 ps
• Maximum Fall Time: 28 ps
• Maximum Output Current: 20 mA
• Operating Supply Voltage: 3.465 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Supply Voltage: 3.3V
• Wavelength Typ: 1310nm
• Leaded Process Compatible: Yes
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Regulatory Compliance
The AFCT-701SDZ complies with all applicable laws and
regulations as detailed in Table 1. Certification level is de-
pendent on the overall configuration of the host equip-
ment. The transceiver performance is offered as a figure
of merit to assist the designer.
Electrostatic Discharge (ESD)
The AFCT-701SDZ is compatible with ESD levels found
in typical manufacturing and operating environments
as described in Table 1. In the normal handling and op-
eration of optical transceivers, ESD is of concern in two
circumstances.
The first case is during handling of the transceiver prior
to insertion into an SFP compliant cage. To protect the
device, it’s important to use normal ESD handling pre-
cautions. These include use of grounded wrist straps,
work-benches and floor wherever a transceiver is han-
dled.
The second case to consider is static discharges to the
exterior of the host equipment chassis after installation.
If the optical interface is exposed to the exterior of host
equipment cabinet, the transceiver may be subject to
system level ESD requirements.
5
Electromagnetic Interference (EMI)
Equipment incorporating 10 gigabit transceivers is
typically subject to regulation by the FCC in the United
States, CENELEC EN55022 (CISPR 22) in Europe and VCCI
in Japan. The AFCT-701SDZ enables equipment compli-
ance to these standards detailed in Table 1. The metal
housing and shielded design of the AFCT-701SDZ mini-
mizes the EMI challenge facing the equipment designer.
For superior EMI performance it is recommended that
equipment designs utilize SFP+ cages per SFF 8432.
RF Immunity (Susceptibility)
Due to its shielded design, the EMI immunity of the
AFCT-701SDZ exceeds typical industry standards.
Eye Safety
The AFCT-701SDZ provides Class 1 (single fault tolerant)
eye safety by design and has been tested for compliance
with the requirements listed in Table 1. The eye safety
circuit continuously monitors the optical output power
level and will disable the transmitter upon detecting a
condition beyond the scope of Class 1 certification Such
conditions can be due to inputs from the host board
(Vcc fluctuation, unbalanced code) or a fault within the
transceiver. US CDRH and EU TUV certificates are listed
in table 1.
Flammability
The AFCT-701SDZ optical transceiver is made of metal
and high strength, heat resistant, chemical resistant and
UL 94V-0 flame retardant plastic.