AFBR-57R5APZ Avago Technologies US Inc., AFBR-57R5APZ Datasheet - Page 10

• Manufacturer Part Number: AFBR-57R5APZ
• Description: TXRX OPT SFP 4/2/1GBD 850NM
• Manufacturer: Avago Technologies US Inc.

Specifications of AFBR-57R5APZ

• Data Rate: 4.25GBd
• Wavelength: 850nm
• Voltage - Supply: 3.3V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Function: Digital Diagnostic SFP, supports high-speed serial links over multimode optical fiber.
• Product: Transceiver
• Maximum Rise Time: 0.09 ns/0.15 ns
• Maximum Fall Time: 0.09 ns/0.15 ns
• Pulse Width Distortion: 0.06 ns (Max)/0.062 ns (Max)
• Operating Supply Voltage: 2.97 V to 3.63 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 10 C
• Package / Case: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1987

10
Table 7. Transmitter Optical Characteristics
(T
Parameter
Modulated Optical Output Power (OMA)
(Peak-to-Peak) 4.25 Gb/s
Modulated Optical Output Power (OMA)
(Peak-to-Peak) 2.125 Gb/s
Modulated Optical Output Power (OMA)
(Peak-to-Peak) 1.0625 Gb/s
Average Optical Output Power
Center Wavelength
Spectral Width – rms
Optical Rise/Fall Time (4.25 Gb/s)
RIN
Transmitter Contributed Total Jitter (4.25 Gb/s)
Transmitter Contributed Total Jitter (2.125 Gb/s)
Transmitter Contributed Total Jitter (1.0625 Gb/s)
Pout TX_DISABLE Asserted
Notes:
1. An OMA of 247 µW is approximately equal to an average power of –8 dBm, avg assuming an Extinction Ratio of 9 dB.
2. An OMA of 196 µW is approximately equal to an average power of –9 dBm, avg assuming an Extinction Ratio of 9 dB.
3. An OMA of 156 µW is approximately equal to an average power of –10 dBm, avg assuming an Extinction Ratio of 9 dB.
4. Max Pout is the lesser of Class 1 safety limits (CDRH and EN 60825) or receiver power, max.
5. Into 50/125 µm (0.2 NA) multi-mode optical fiber.
6. Contributed DJ is measured on an oscilloscope in average mode with 50% threshold and K28.5 pattern. Contributed TJ is the sum of contributed
C
= -10°C to 85°C, VccT, VccR = 3.3V ±10%)
RJ and contributed DJ. Contributed RJ is calculated for 1x10
the oscilloscope by 14. Per FC-PI (Table 13 - MM jitter output, note 1), the actual contributed RJ is allowed to increase above its limit if the actual
contributed DJ decreases below its limits, as long as the component output DJ and TJ remain within their specified FC-PI maximum limits with
the worst case specified component jitter input.
12
(OMA)
Symbol
Tx,OMA
Tx,OMA
Tx,OMA
Pout
l
s,rms
tr, tf
RIN
TJ
TJ
TJ
P
-12
C
OFF
BER by multiplying the RMS jitter (measured on a single rise or fall edge) from
Minimum
247
196
156
-9.0
830
Typical
Maximum
860
0.85
90
-118
0.25
60
0.25
120
0.27
252
-35
Unit
µW
µW
µW
dBm
nm
nm
ps
dB/Hz
UI
ps
UI
ps
UI
ps
dBm
Notes
Note 1
Note 2
Note 3
Note 4, 5
20% - 80%
Note 6
Note 6
Note 6