HFBR-2536 Avago Technologies US Inc., HFBR-2536 Datasheet - Page 6

• Manufacturer Part Number: HFBR-2536
• Description: RCVR OPT HI SPEED VERS LINK VERT
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-2536

• Data Rate: 125MBd
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 9mA
• Applications: General Purpose
• Function: The Receiverss convert a received optical signal to an analog output voltage.
• Product: Receiver
• Wavelength: 650 nm
• Maximum Rise Time: 6.3 ns
• Maximum Fall Time: 6.3 ns
• Maximum Output Current: 25 mA
• Operating Supply Voltage: - 0.5 V to + 6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• For Use With: Plastic Optical Fiber, Hard Clad Silica
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Power - Minimum Receivable: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

6
125 Megabaud Versatile Link Transmitter
HFBR-15X7Z Series
Description
The HFBR-15X7Z transmitters incorporate a 650 nano-
meter LED in a horizontal (HFBR-1527Z) or vertical
(HFBR-1537Z) gray housing. The HFBR-15X7Z transmit-
ters are suitable for use with current peaking to decrease
response time and can be used with HFBR-25X6Z receiv-
ers in data links operating at signal rates from 1 to 125
megabaud over 1 mm diameter plastic optical fiber or
200 µm diameter hard clad silica glass optical fiber. Refer
to Application Note 1066 for details for recommended
interface circuits.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Temperature Cycle Time
Transmitter High Level Forward
Input Current
Transmitter Average Forward Input Current
Reverse Input Voltage
WARNING: WHEN VIEWED UNDER SOME CONDITIONS, THE OPTICAL PORT MAY EXPOSE THE EYE BEYOND THE MAXI-
MUM PERMISSIBLE EXPOSURE RECOMMENDED IN ANSI Z136.2, 1993. UNDER MOST VIEWING CONDITIONS THERE IS NO
EYE HAZARD.
CAUTION: The small junction sizes inherent to the design of this component increase the component’s susceptibility to damage from
electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
Symbol
I
T
I
V
T
F,AV
F,H
CATHODE
O
GROUND
GROUND
S
R
ANODE
1
2
3
4
Min.
-40
-40
SEE NOTE 6
Max.
260
120
85
70
10
60
3
GROUND
GROUND
Unit
mA
mA
°C
°C
°C
V
s
50% Duty Cycle
Reference
≥ 1 MHz
Note 1