M0240SD-402MDAR1-3 Newhaven Display, M0240SD-402MDAR1-3 Datasheet - Page 13

• Manufacturer Part Number: M0240SD-402MDAR1-3
• Description: MODULE VF CHAR 2X40 5.34MM
• Manufacturer: Newhaven Display

Specifications of M0240SD-402MDAR1-3

• Outline L X W X H: 182.00mm x 33.50mm x 17.60mm
• Viewing Area: 134.75mm L x 11.50mm W
• Display Format: 40 x 2
• Display Type: Character
• Format: 5 x 8 Dots
• Voltage - Supply: 4.5 V ~ 5.5 V
• Character Size: 5.34mm H x 2.10mm W
• Interface: Parallel
• Operating Temperature: -20°C ~ 70°C
• Product: Character Display Modules
• Character Count X Line: 40 x 2
• Module Size (w X H X T): 182 mm x 33.5 mm x 17.6 mm
• Voltage Rating: 4.5 V to 5.5 V
• Operating Temperature Range: - 20 C to + 70 C
• Dot Format: 5 x 8
• Viewing Area (w X H): 134.75 mm x 11.5 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Dots: -
• Lead Free Status / Rohs Status: Details

STANDARD
NAME
5.3.2 External
5.4 Soldering Land Function
3) Display on/off control:
4) Entry mode set:
5) Function set
6) CPU interface type
Some soldering lands are prepared on the rear side of PCB, to set operating mode of the display
module. A soldering iron is required to short soldering lands.
In order to use this function, a user must connect the soldering pad “JP1”. When the soldering pad
“JP1” is open-circuited, this function is not valid and when it is short-circuited, the third hole (pin #3)
is used for external reset input. If low level signal longer than 500ns is input into the hole, reset
function being same as power on reset is executed.
Table-13 of No 1 and No 2 of JP4 setting
D=0; Display off
B=0; Blinking off
C=0; Cursor off
L/D=1; Increment by 1
S=0; No shift
IF=1; 8-bit interface data
BR0=BR1=0; Brightness=100%
N=1; 2-line display
When JP0=Open; M68 type (Factory Setting)
When JP0=Short; i80 type
Table-12 of JP2 setting
No 1 and No 2 of JP4
Open
Short
Open
Short
JP2
No connection
No 3 of CN1
FUNCTION
M68 type
/RESET
I80 type
DOCUMENT NO.
REV.NO
00
12/20
PAGE