VK162-12 Matrix Orbital, VK162-12 Datasheet - Page 11

• Manufacturer Part Number: VK162-12
• Description: VFD DISPLAY 16X2 SER/I2C
• Manufacturer: Matrix Orbital
• Series: VK162-12r

Specifications of VK162-12

• Outline L X W X H: 80.00mm x 36.00mm x 12.70mm
• Viewing Area: 51.40mm L x 11.40mm W
• Display Format: 16 x 2
• Display Type: Character
• Format: 5 x 7 Dots
• Character Size: 4.76mm H x 2.46mm W
• Interface: Serial
• Operating Temperature: -20°C ~ 70°C
• Product: Character Display Modules
• Character Count X Line: 16 x 2
• Module Size (w X H X T): 80 mm x 36 mm x 12.7 mm
• Operating Temperature Range: - 20 C to + 70 C
• Dot Format: 5 x 7
• Viewing Area (w X H): 51.4 mm x 11.4 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Number Of Dots: -
• Lead Free Status / Rohs Status: Details
• Other names: 635-1014

2.1.1 Power Through DB-9 Jumper
Power through DB-9 Jumper pictured in
the power through DB-9 option, see table 1 on the following page for display module voltage requirements.
2.2 Power/Data Connector
12 requires five volts for the standard display module, between nine to fifteen for the wide voltage (V)
and between nine to thirty-five volts for the wide voltage with efficient power supply module (VPT). The
voltage is applied through pins one and four of the four pin Power/Data connector. Pins two and three are
reserved for serial transmission, using either the RS-232/TTL or the I
Matrix Orbital
In order to provide power through pin 9 of the DB-9 Connector you must place a solder jumper on the
The Power/Data Connector provides a standard connector for powering the display module. The VK162-
WARNING Do not apply voltage through pin 9 of the DB-9 connector
AND through the Power/Data Connector at the same time.
Figure 11: Power Through DB-9 Jumper
figure 11
VK162-12
below. The VK162-12 allows all voltage models to use
2
C protocol, depending on what has
7