LQ10D368 Sharp Microelectronics, LQ10D368 Datasheet - Page 20

• Manufacturer Part Number: LQ10D368
• Description: LCD TFT 10.4" 640X480 VGA
• Manufacturer: Sharp Microelectronics

Specifications of LQ10D368

• Display Type: LCD - Color
• Display Mode: *
• Viewing Area: 211.20mm L x 158.40mm W
• Dot Pixels: 640 x 480 (VGA)
• Pixel Density: 640 x 480
• Module Size (w X H X T): 246.5 mm x 179.4 mm x 10.5 mm
• Backlighting: White
• Diagonal: 10.4 in
• Viewing Area (w X H): 211.2 mm x 158.4 mm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Interface: -
• Backlight: -
• Dot Size: -
• Dot Pitch: -
• Lead Free Status / Rohs Status: Details
• Other names: 425-2471

LD13305-17
Procedure to backlight replacement
Lamp which is used in the LCD module is consumable goods. When the lamp replacement is needed due to the
expiry of lamp-operating life, replace the lamp with lamp holder following with below procedure 1) to 4).
Make sure that the power supply of DC/AC inverter which operates the lamp is turned off before the lamp
replacement. Also, please wear fingerstall and be careful not to put any stain or scratch on the LCD panel.
Replacement procedure
(1) Put the module rear side on the top.
(2) Slide the edge (shaded area) of the lamp unit to the direction which arrow X indicates.
(The hook of the lamp unit will be unhooked from the hook b of the module.)
(3) Slide the lamp unit to the direction which arrow Y indicates, holding the edge of the lamp unit slided to the
direction which arrow X indicates.
(4) Insert new lamp unit into the LCD module and install the lamp unit until the hook a and b is engaged.