S2S3RY Sharp Microelectronics, S2S3RY Datasheet - Page 12

PHOTOCOUPLER 600V TRIAC VDE 4SMD

S2S3RY

Manufacturer Part Number
S2S3RY
Description
PHOTOCOUPLER 600V TRIAC VDE 4SMD
Manufacturer
Sharp Microelectronics
Datasheet

Specifications of S2S3RY

Voltage - Isolation
3750Vrms
Number Of Channels
1
Voltage - Off State
600V
Output Type
AC, Triac, Standard
Current - Gate Trigger (igt) (max)
7mA
Current - Hold (ih)
100µA
Current - Dc Forward (if)
50mA
Current - Output / Channel
50mA
Mounting Type
Surface Mount
Package / Case
4-SMD
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
425-1301-5
● Cleaning instructions
● Presence of ODC
Solvent cleaning :
Ultrasonic cleaning :
Recommended solvent materials :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
12
Sheet No.: D2-A06501EN
S2S3 Series

Related parts for S2S3RY