PC123F1J000F Sharp Microelectronics, PC123F1J000F Datasheet - Page 12

• Manufacturer Part Number: PC123F1J000F
• Description: PHOTOCOUPLER TRAN OUT WIDE 4-DIP
• Manufacturer: Sharp Microelectronics

Specifications of PC123F1J000F

• Number Of Channels: 1
• Input Type: DC
• Voltage - Isolation: 5000Vrms
• Current Transfer Ratio (min): 50% @ 5mA
• Current Transfer Ratio (max): 400% @ 5mA
• Voltage - Output: 70V
• Current - Output / Channel: 50mA
• Current - Dc Forward (if): 10mA
• Vce Saturation (max): 200mV
• Output Type: Transistor
• Mounting Type: Through Hole
• Package / Case: 4-DIP
• Configuration: 1
• Maximum Collector Emitter Voltage: 70 V
• Maximum Collector Emitter Saturation Voltage: 200 mV
• Isolation Voltage: 5000 Vrms
• Current Transfer Ratio: 400 %
• Maximum Forward Diode Voltage: 1.4 V
• Maximum Collector Current: 50 mA
• Maximum Power Dissipation: 200 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 30 C
• Maximum Fall Time: 18 us
• Maximum Input Diode Current: 50 mA
• Maximum Reverse Diode Voltage: 6 V
• Maximum Rise Time: 18 us
• Output Device: Transistor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

● Cleaning instructions
● Presence of ODC
Solvent cleaning:
Ultrasonic cleaning:
Recommended solvent materials:
Solvent temperature should be 45˚C or below Immersion time should be 3minutes or less
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this product.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBB and PBDE are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive.
•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated
diphenyl ethers (PBDE).
12
PC123J00000F Series
Sheet No.: D2-A02904EN