TLE6209R Infineon Technologies, TLE6209R Datasheet - Page 11

• Manufacturer Part Number: TLE6209R
• Description: IC H-BRIDGE 7A DC MOTOR PDSO-20
• Manufacturer: Infineon Technologies
• Type: Half Bridge DC Motor Driverr

Specifications of TLE6209R

• Applications: DC Motor Driver, H Bridge
• Number Of Outputs: 1
• Current - Output: 6A
• Voltage - Supply: 4.4 V ~ 40 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-20
• Operating Supply Voltage: 5.2 V to 40 V
• Supply Current: 5 mA
• Mounting Style: SMD/SMT
• Packages: PG-DSO-20
• Current Limit (min.): 5.95 A
• Rthjc (max): 1.5 K/W
• Quiescent Current (max.): 50 µA
• Operating Range: 5.2 - 40 V
• Rds (on) (typ./switch): 140.0 mOhm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Load: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000013299; SP000304414; TLE6209R; TLE6209RNT; TLE6209RT; TLE6209RTR; TLE6209RXT

thresholds. As soon as a threshold is reached, the according status bits are set in the
SPI diagnosis word (c.f. Table 5). If the overtemperature shutdown threshold is reached,
the output stages are turned off. The temperature monitoring messages and the over
temperature shutdown are latched and can be reset by the status register reset bit 7 of
the SPI control word or a POR.
2.5.6
The power supply Voltage is monitored for over- and under voltage lockout:
• Under Voltage Lockout
• Over Voltage Lockout
2.5.7
Bit 0 of the SPI diagnosis word is an OR of the status bits 1 to 7. It can be read out without
full SPI communication as described in Figure 8.
Data Sheet, Version 3.2
If the supply voltage
transistors are switched off and the power supply fail bit (bit 7 of the SPI diagnosis
word) is set. If
stages are restarted. The error bit, however, is latched and has to be reset by the
status register reset bit 7 of the SPI control word.
If the supply voltage
are switched off and the power supply fail bit (bit 7 of the SPI diagnosis word) is set.
If
restarted. The error bit, however, is latched and has to be reset by the status register
reset bit 7 of the SPI control word.
The OVLO is only active if control bit 6 is H. If the bit is low, the OVLO is deactivated.
V
S
falls again and reaches the switch on voltage
Error Flag
Power Supply Fail
V
S
rises again and reaches the switch on voltage
V
S
rises above the switch off voltage
V
S
drops below the switch off voltage
11
V
OV ON
V
OV OFF
, the power stages are
, all output transistors
V
V
UV OFF
UV ON
TLE 6209 R
, all output
, the power
2010-09-10