MIKROE-453 mikroElektronika, MIKROE-453 Datasheet - Page 9

• Manufacturer Part Number: MIKROE-453
• Description: Development Boards & Kits - PIC/DSPIC LV18F V6 DEVELOPMENT SYSTEM
• Manufacturer: mikroElektronika

Specifications of MIKROE-453

• Rohs: yes
• Product: Development Kits
• Core: PIC
• Interface Type: ICD, IDC10, JTAG, RS-232, USB
• Operating Supply Voltage: 5 V, 9 V to 32 V
• Data Bus Width: 8 bit
• Description/function: Development Board Only, Touch Screen, Pencil, DS1820, LCD, Serial Cable, GLCD not included
• Dimensions: 265 mm x 220 mm
• For Use With: PIC

LV 18F v6 Development System
LV 18F v6 Development System
3.0. On-board USB 2.0 LV18PICprog with mikroICD Programmer
A programmer is a necessary tool when working with microcontrollers. The LV 18F v6 has an on-board LV18PICprog programmer with
mikroICD support which provides an interface between the microcontroller and the PC. The LV18PICfl ash program is used for loading
a .hex fi le into the microcontroller. Figure 3-2 shows connection between the compiler, LV18PICprog with mikroICD programmer and
the microcontroller.
Figure 3-2: The process of programming
NOTE:
Write a code in one of the PIC compilers, generate
a .hex fi le, and employ the on-board programmer
to load data into the microcontroller.
For more information on the LV18PICfl ash with mikroICD programmer refer to the relevant manual provided with the system.
LED diode marked as USB LINK
indicates the established connection
between the programmer and a PC
LED diode marked as PRG/ICD will
illuminate while transferring a code
from a PC to the microcontroller
1
USB connector of B type
Compiling program
Click on the Load button for
.hex code loading
Figure 3-1: LV18PICfl ash with mikroICD
programmer
2
3
compilers and generate a .hex fi le;
to select desired microcontroller to be
programmed and load a .hex fi le;
the code into the microcontroller.
1
2
3
Write a program in one of the PIC
Use the LV18PICfl ash program
Click the Write button to dump
On the left side of the
LV18PICfl ash
window, there is a number
of options used for setting
parameters for the operation
of the microcontroller. Options
enabling the .hex code to be
loaded into the microcontroller
are provided on the right side
of the window. Positioned
in the bottom right corner of
the window, the Progress bar
enables you to monitor the
programming progress.
MikroElektronika
program’s
9