GLS85LP1008B-M-C-LFTE (rev. CB1) Greenliant, GLS85LP1008B-M-C-LFTE (rev. CB1) Datasheet - Page 26

• Manufacturer Part Number: GLS85LP1008B-M-C-LFTE (rev. CB1)
• Description: Flash 8G MLC, NAND MLC 3.3V Comm
• Manufacturer: Greenliant

Specifications of GLS85LP1008B-M-C-LFTE (rev. CB1)

• Product Category: Flash
• Rohs: yes

Advance Information
©2010 Greenliant Systems, Ltd.
Command (7)
Command (7)
Sec Num (3)
Sec Num (3)
Cyl High (5)
Cyl High (5)
Cyl Low (4)
Cyl Low (4)
Sec Cnt (2)
Sec Cnt (2)
Feature (1)
Feature (1)
Set-Sleep-Mode - 99H or E6H
This command causes the NANDrive to set BSY, enter the Sleep mode, clear BSY and generate
an interrupt. Recovery from sleep mode is accomplished by simply issuing another command (a
reset is permitted but not required). Sleep mode is also entered when internal timers expire so the
host does not need to issue this command except when it wishes to enter Sleep mode immedi-
ately. The default value for the timer is 15 milliseconds.
Set-WP#/PD#-Mode - 8BH
This command configures the WP#/PD# pin for either the Write Protect mode or the Power-down
mode. When the host sends this command to the device with the value AAH in the feature register,
the WP#/PD# pin is configured for the Write Protect mode. The Write Protect mode is the factory
default setting. When the host sends this command to the device with the value 55H in the feature
register, WP#/PD# is configured for the Power-down mode.
All values in the C/D/H register, the Cylinder Low register, the Cylinder High register, the Sector
Number register, the Sector Count register, and the Feature register need to match the values
shown above, otherwise, the command will be treated as an invalid command.
Once the mode is set with this command, the device will stay in the configured mode until the next
time this command is issued. Power-off or reset will not change the configured mode.
Error Posting
The following table summarizes the valid status and error values for the NANDrive command set.
C/D/H (6)
C/D/H (6)
Bit ->
Bit ->
7
7
6
X
6
X
5
5
26
Drive
Drive
4
4
55H or AAH
99H or E6H
8BH
6EH
44H
72H
50H
X
X
X
X
X
3
3
8 GByte NANDrive
2
2
X
X
GLS85LP1008B
S71421-02-000
1
1
0
0
05/10