GLS85LP1008B-M-C-LFTE (rev. CB1) Greenliant, GLS85LP1008B-M-C-LFTE (rev. CB1) Datasheet - Page 15

• Manufacturer Part Number: GLS85LP1008B-M-C-LFTE (rev. CB1)
• Description: Flash 8G MLC, NAND MLC 3.3V Comm
• Manufacturer: Greenliant

Specifications of GLS85LP1008B-M-C-LFTE (rev. CB1)

• Product Category: Flash
• Rohs: yes

8 GByte NANDrive
GLS85LP1008B
©2010 Greenliant Systems, Ltd.
Address
104-127
129-159
160-216
218-254
1. xxxx = Don’t care. This field is subject to change by the host or the device.
2. bbbb - default value set by controller. The selections could be user programmable.
3. n - calculated data based on product configuration
4. eeee - the default value is ‘0000000000’
5. dddd - unique number of each device
6. aaaa - any unique Greenliant firmware revision
7. cccc - default value is “xxxMB NANDrive” or “xxxGB NANDrive” where xxx is the flash drive capacity.
Word
Table 8: Identify-Drive Information (Continued) (3 of 3)
Word 0: General Configuration
This field informs the host that this is a non-magnetic, hard sectored, removable storage device
with a transfer rate greater than 10 MByte/sec and is not MFM encoded.
Word 1: Default Number of Cylinders
This field contains the number of translated cylinders in the default translation mode. This value
will be the same as the number of cylinders.
Word 3: Default Number of Heads
This field contains the number of translated heads in the default translation mode.
Word 6: Default Number of Sectors per Track
This field contains the number of sectors per track in the default translation mode.
Word 7-8: Number of Sectors
This field contains the number of sectors per NANDrive. This double word value is also the first
invalid address in LBA translation mode. This field is only required by CF feature set support.
Word 10-19: Serial Number
The contents of this field are right justified and padded with spaces (20H). The right-most ten bytes
are a Greenliant preset, unique ID. The left-most ten bytes are a user-programmable value with a
default value of 0000000000.
Word 23-26: Firmware Revision
This field contains the revision of the firmware for this product.
Word 27-46: Model Number
This field is reserved for the model number for this product.
128
217
255
The user has an option to change the model number during manufacturing.
Default
Value
0000H
0000H
0000H
0001H
0000H
bbA5H
xxxxH
1
Bytes
Total
114
48
62
74
2
2
2
Data Field Type Information
Reserved
Security Status
Vendor unique bytes
Reserved
Nominal media rotation rate of the device
Reserved
Integrity word [15-8 Checksum, 7-0 Signature (A5H)]
15
Advance Information
S71421-02-000
T8.4 1421
05/10