MIKROE-711 mikroElektronika, MIKROE-711 Datasheet - Page 2

• Manufacturer Part Number: MIKROE-711
• Description: Bluetooth / 802.15.1 Modules BLUETOOTH 2 STICK ADAPTER BOARD
• Manufacturer: mikroElektronika

Specifications of MIKROE-711

• Rohs: yes
• Class: 1
• Frequency Band: 2.4 GHz
• Sensitivity: - 90 dBm
• Operating Supply Voltage: 3.3 V
• Interface Type: UART
• Dimensions: 52.45 mm x 16.26 mm

MikroElektronika
BlueTooth 2 Stick
The BlueTooth 2 Stick is an additional board which enables the microcontroller to communicate with wireless devices.
Key features:
Appliance:
The BlueTooth 2 Stick additional board is used as a wireless interface between microcontroller and other bluetooth
device. For communication with a microcontroller, the additional board uses serial UART communication. To connect
this additional board to a microcontroller you can use six marked pads (CN1). It is also possible to solder a 1x6 male
header to pads.
Jumper settings:
The additional board comes with soldered smd jumpers which can be removed by desoldering.
Jumpers description:
- J1: Enables connection between RTS pad and bluetooth module RN41;
- J2: Enables connection between CTS pad and bluetooth module RN41;
Pinout:
Pads pinout (CN1):
- RX: MCU UART receive Input;
- TX: MCU UART transmit output;
- CTS: MCU Clear To Send;
- RTS: MCU Request To Send;
- VCC-3.3V: 3.3V DC power supply; and
- GND: Ground.
- Serial UART communication;
- Support for 802.11 Coexistence;
- Range up to 1000m;
- 3.3V DC power supply.
Figure 1: BlueTooth 2 Stick
BlueTooth Stick