GL843 GENESYS [GENESYS LOGIC], GL843 Datasheet - Page 77

• Manufacturer Part Number: GL843
• Description: High Speed USB 2.0 With ADF 2-in-1 Scanner Controller
• Manufacturer: GENESYS [GENESYS LOGIC]

27 GPO28~33 Ports
GL843 provides 6 ports for general-purpose output. They exist in both 128 and 208 pins packages.
28 Power on Check
The default status of the PWRBIT control bit is reset. Programmers can set the PWRBIT control bit before
controlling the ASIC. GL843 will keep the status until power is turn off. This operation is to check if the
power had been turned off or not.
29 Extended GPIO
GPIO21~26 is only available in 208 pins QFP package.
30 LED Blinking
GL843 supports LED -blinking function. It is implemented in GPIO15~16 pins and GPIO21~26.
31 Support Back Scanning
GL843 supports forward or backward scanning.
32 Support LCD Interface
GL843 supports LCD display interface via internal logic circuitry. Programmers need to set the LCDSEL
control bit to logic ‘1’.
33 Support LCM Interface
GL843 supports LCM display interface via internal logic circuitry. Programmers need to set the LCMSEL
control bit to logic ‘1’. GPIO19 controls RS of LCM. GPIO20 controls EN of LCM.
GPIO1~4 control the data bus of LCM and share the input of keys matrix. GPIO18 controls the /E of external
74HC244.
The 74HC244 is a bus buffer to share keys matrix and LCM data bus.
Following is the application of keys matrix & LCM display.
©2000-2006 Genesys Logic Inc. - All rights reserved.
GPIO11: This pin can control bipolar motor driver IC (2916,6219,3955 or 3967) Vref for control
3. This pin can control bipolar motor driver IC (2916,6219,3955 or 3967) Vref for controlling
Imax current.
GL843 High Speed USB2.0 With ADF 2-in-1 Scanner Controller For 3x
Imax current.
Page 77